1,000 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameelectronic potting silicone rubber
Min Order1000 kilogram
brand nameHong Ye silicone rubber
modelHY-9055 HY-9300 HY -210
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 19:44:24 GMT
color gray
payment TT /LC /West union
certificates Rohs,Msds,Sgs,ISO9001:2000
features thermostability
mix 1:1 or 10:1
promotion over 500KG 2% discount
environmental protection yes
usage Electronic Potting
samples samples
material liquid silicone with two part
Min Order1000 kilogram
Electronic Potting silicone rubber
1,Product Feature of Electronic Potting silicone rubber
Electronic potting compound is a kind of low viscosity, Inherent flame resistance, two components (1:1mixing ratio)addtion cured potting silicone with heat-conducting. It cures with both on room temperature and heated temperature. It has the feature of the higher temperature the faster of the curing time. It can be applied to electronic components for insulation, waterproofing, fixed and flame retardant. It mainly applied in electronic components surface with materials of PC(Poly-carbonate),PP,ABS,PVC, etc. and metal materials.
2,Typical Application of Electronic Potting silicone rubber
-----High powered electronics encapsulation
-----DC/DC module and circuit board which requires heat dissipation and high temperature resistance.
-----It can be broadly used for LED screen, Wind Power Generator, PCB substrate, etc.
3,Notes and operation instructions of Electronic Potting silicone rubber
1).The following material may hinder the curing of electronic potting silicone, So pls use after the test. When necessary, pls clean the application areas.
l Organotin compound or Condensation silicone with organotin
l Sulphur, sulfide and sulfur rubber materials.
l Amine compounds as well as contains the amine materials.
l Pewters solder flux
2). Deaeration the mixture in vacuum pump under 0.08 MPa for 3-5 minutes.Then the mixture could be used for pouring.
3) Pls note that the thickness of the silicone affects the curing time. If the silicone used is a little thick,then the curing time will be a little longer.The temperature also affects the curing time.When in lower temperature, we suggest customers appropriately heat the mixture to accelerate vulcanization.
4) Above eclectronic potting silicone should be sealed storage.The mixture should be used up disposably to avoid causing waste.
5) Above silicone belongs to non-dangerous goods, but keep away from mouth and eyes.
6) When it gets stratified after a period of storage, Please mix it evenly before using,which does not affect the performance.
4,PACKAGE of Electronic Potting silicone rubber
20Kg/pail as a set (Part A 10Kg + Part B 10Kg)
7,SHELF LIFE AND TRANSPORTATION of Electronic Potting silicone rubber
1. Twelve(12) months when stored at 25°C in tightly closed original packages.
2. This kind of product is non-dangerous product, which could be transported as general chemicals.
3. Storage beyond the expired date doesnot necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
Need any more information about Electronic Potting silicone rubber ,please feel free to contact with us.
HONG YE JIE TECHNOLOGY CO.,LTD.
..........com ..........net
address:Liulian Shibi Industrial Zone, Pingdi Town,
Long Gang district, Shenzhen, China518117
Contact Person: Wenson
Tel: +86-755-89948006
Fax: +86-755-89948030
Cel:+86-18938867531
Email : hyb(at)szrl(dot)net
skype: Wensona
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.