RTV-2 Silicone Rubber for Pads

Features of   RTV-2 Silicone Rubber for Pads 

a.  RTV-2 Silicone Rubber for Pads with good printing effects

b.  RTV-2 Silicone Rubber for Pads with  fine quality

c.  RTV-2 Silicone Rubber for Pads with good resilience

d.  RTV-2 Silicone Rubber for Pads without any impurity

Applicaton of  RTV-2 Silicone Rubber for Pads

RTV-2 Silicone Rubber for Pads   is mainly applicable to the printing of irregular patterns such as

1. plastics toys

2. electroplating products, enlectronic toys

3. trademarks, artwork gifts

4. stationery, etc.

Operation Instuction of  RTV-2 Silicone Rubber for Pads

RTV-2 Silicone Rubber for Pads , part A is liquid silicone rubber, part B is catalyst, the usually mixing ratio for silicone rubber for pad printing and catalyst is 100:2-3, eg. We take 100g of liquid silicone rubber for pad printing, then we add 2-3 grams catalyst, and mix them evenly and pour it to your mold. Then after 2-4 hours, you will obtain a silicone rubber printing pad.

FOQ of   RTV-2 Silicone Rubber for Pads  

1. Why does the silicone pad can not drop oil well?

 During the process of manufacturing toys, the steel mold need to spray the release agent for every dozens of products, the first or second product exists lots of release agent on the surface regarding the mold having just sprayed with the release agent. It is very normal that the incomplete printing patterns of more than 2 in 10 plastic toys or products which are not sprayed with paint  may not drop ink well. If the product is directly taken for pad printing before being cleaned by the thinner, hence, the phenomenon just arises. 

Any question abt   RTV-2 Silicone Rubber for Pads pls ask free to Ms. Bella

Mobile: 0086-18938867572 

Tel: 0086-755-89948006

Fax: 0086-755-89948030

 Website: www (dot) szrl (dot) net
Email:hysi(at)szrl(dot)net

Skype: bellasky