silicone rubber for LED products
- US $12.50
200 - 40,000 kilogram
- US $9.80
40,001 - 999,999 kilogram
group nameelectronic potting silicone rubber
-
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelHY 210 silicone
payment methodT/T, L/C, Westem Union
-
update timeSat, 09 Nov 2013 13:23:44 GMT
Paramtents
color white/grey
certificate ISO9001:2000
Packging & Delivery
Min Order200 kilogram
Briefing
easy operation
resistance to deformation
good tensile strength
nontoxic and durable.
Detailed
Features & Applications of silicone rubber for LED products
HY 210 is condensation silicone potting compound in two parts with low viscosity.
It can be cured completely at room temperature. HY 210 works on the surface of material as PC(Poly-carbonate),PP,ABS,PVC as to its superior bonding feature. It is also applicable for insulation, waterproof and bonding of electronics parts. It meets the requirements of European RoHS.
silicone rubber for LED products Typical Application
- Potting for Protetion of general electronic Module.
- Outdoor protection for LED screen.
silicone rubber for LED products Technical Parameters:
Properties index | Part A | Part B | |
Before Curing
| Appearence | Black fluid | Colorless/yellowish fluid |
Viscosisty(cps) | 2500±500 | - | |
Features when operation | Mixing Ratio(By weight) | 10:1 | |
Operating Time(25°C /min) | 20~30 | ||
Curing time(hr,basically cured) | 3 | ||
Curing time(hr,perfectly cured) | 24 | ||
Hardness(shore A) | 15±3 | ||
After Curing | Thermal Conductivity[W(m·K)] | ≥0.2 | |
Dielectric Strength(kV/mm) | ≥25 | ||
Dielectric permittivity(1.2MHz) | 3.0~3.3 | ||
Volume resistivity(Ω·cm) | ≥1.0×1016 | ||
Fire Resistance | 94-V1 | ||
silicone rubber for LED products TECHNICAL GUIDELINES
1, Please put part A and part B in separate container and stir evenly before mixing the two parts together.
2, Weight Ratio: part A: part B = 10:1
3, Bubble release if necessary. Deaeration the mixture under 0.08 MPa for 3 minutes.
4,HY 210 is cured at room temperature, so pls put it under room temperature after pouring.It comes to next process when basically cured, and it takes about 24 hours for completely cured.
Kindly note: Temperature and Humidity with a tremendous influences for curing of HY 210.
You need a product
You May Like
- Nearest port for product export
- Shenzhen, Guangzhou, Xiamen, Shanghai
- Delivery clauses under the trade mode
- FOB, CFR, CIF
- Acceptable payment methods
- T/T, L/C, Westem Union
- Export mode
- Export through agents