group nameFEP
Min Order100 kilogram
brand nameFotech
modelFT-1/2/3/401/402/501/502
payment methodL/C, D/A, D/P, T/T
update timeWed, 08 May 2024 11:23:41 GMT
Min Order100 kilogram
FEP Resin for Extrusion
FEP is the copolymer of tetrafluoroethylene (TFE) and hexafluoropropylene (HFP). It has excellent thermo-stability, outstanding chemical inertness, lowfriction coefficient, distinctive air aging resistance, vapor penetrating resistance, non-inflammability and superior electrical insulation.
FEP extrusion grade is mainly used in extruding insulation layers and jackets for conducting wire and cable. It’s also widely used in the production of pipe, tube, film and etc.
| FEP Extrusion Grade | ||||||
FT-1 | FT-2 | FT-3 | FT-401 | FT-402 | FT-501 | FT-502 | |
Appearance | Clean semi-transparent pellet | ||||||
Melt flow rate(g/10min) | 2.1-4.0 | 4.1-8.0 | 8.1-12.0 | 12.1-16.0 | 16.1-20.0 | 20.1-24.0 | 24.1-35.0 |
Tensile strength (MPa)≥ | 25 | 21 | 21 | 20 | 20 | 18 | 16 |
Elongation at Break(%)≥ | 300 | 300 | 300 | 300 | 300 | 280 | 250 |
Melting point(℃) | 265±10 | 265±10 | 265±10 | 265±10 | 265±10 | 265±10 | 265±10 |
S.S.G | 2.12-2.17 | ||||||
Volatile(%)≤ | 0.10 | ||||||
Thermo-stress craze resistance | Very good | Very good | good | good | good | good | good |
Dielectric loss tangent (106HZ) | 3.0×10-4 | 4.0×10-4 | |||||
Application | Thick wire jacket, valve etc. | Wire and cable for general purpose, pipe, tube etc. | High Speed Extrusion. Thin wire and cable, tube etc. |
Package, storage and transportation:
FEP resin issealed in plastic bag with 25kgnet weight per bag, and then packed in drum or big cardboard box. It should bestored in clean and dry warehouses to avoid pollution from impurities. The processing temperature should be below 400℃to avoid releasing toxic gases.
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.