The Telstra 4G1800MHz/CDMA800MHz PRO repeater provides a wireless improvement in signal strength to areas that were once affected by the poor cellular reception. The coverage is up to 500sqm.
The Telstra 4G1800MHz/CDMA800MHz PRO Repeater works with all Telstra CDMA and 4G mobile service in Australia and supports up to 75 users.
Frequency: CDMA800MHz uplink: 825-840 MHz Downlink: 870-890 MHz
4G1800MHz Uplink: 1710~1785MHz Downlink: 1805~1880MHz
Power:-70~-40dBm
Gain:60±3DB
Max Output Power:+23dBm/±3DBM Total power
Impedance:50Ω
Seclusion:<70dB
Connector Type: N-F
Compact Design:Indoor Use
Operating Temperature:-10℃-60℃
Power Supply:AC 110/220V
Coverage Area: 500m2
Dimension:29cm×19cm×5cm
Weight : 1.5kg
4G1800MHz/CDMA800MHz Repeater is applicable to blind spot signal amplification in various indoor places such as conference halls, hotels, and the bottom of large buildings.
Expand the base station signal coverage area.
Improve the coverage of transmitting and receiving mobile phone signals.
Reduce cell phone radiation to the human body.
Prolong the battery life and life of mobile phones.
The installation is easy, flexible, flexible configuration according to the specific situation.
Product environmental protection, small size, low cost.
Full-duplex work, high isolation on the up/down.
The use of advanced digital filtering technology, external suppression is particularly good.
The coverage scheme is economical and reasonable. The isolation of the receiving and transmitting antennas is good and no interference will occur.
The outdoor overflow signal is small and does not interfere with the base station reception sensitivity.
Casting integration, fully enclosed shell, beautiful and durable.
Amplifier host: 1 piece
Outdoor antenna: 1 piece
Indoor antenna: 1 piece
Power supply: 1 piece
Cable: 10m(outdoor)+5m (indoor)