Safety mats are laid on dangerous equipment to protect personnel from entering.

  • group nameThe standard specification area protects the operator's safety mat.

  • Min Order1 piece

  • brand nameCYNDAR

  • modelLS

  • payment methodT/T, PayPal

  • update timeMon, 08 Feb 2021 16:58:01 GMT

Paramtents

  • Edge length min/max 200mm/3000mm

  • Safety mat switching current Max.100mA

  • Protection level IP65

Packging & Delivery

  • Min Order1 piece

Briefing

It is characterized as a pressure-sensitive Carpet switch, which can protect the human body in real time.

Detailed

Product Features

Safety mat is a safety protection measure based on safety. It is characterized as a pressure-sensitive Carpet switch, which can protect the human body in real time. However, because the material is a natural rubber component, there are requirements for the use environment. The general use environment is a dry place with a temperature of -30-60°C. The safety carpet itself is waterproof and corrosion-resistant.

The following actions will damage the safety carpet:

1) The safety carpet cannot be curled during use, installation and transportation.

2) Do not drill or cut holes in the safety carpet.

3) The safety carpet cannot be cut and used

4) Do not hammer the safety carpet or drive nails (screws) on the safety carpet

5) Do not drag the cable to move or carry the safety carpet.

6) Do not place overweight objects on the safety carpet for a long time. The maximum load capacity is 80KG/cm² (8 hours)

Test principle

EN1760-1,ISO13856-1

project

model

LS-PSM2

LS-PSM3

Detection method

Pressure sensing method

Trigger force

<20kg

Maximum allowable load (8 hours)

≤400N/cm²

≤800N/cm²

Mechanical life

>1,000,000 times

>3,000,000times

Safety carpet area

≤1.5㎡

Edge length min/max

200mm/3000mm

Packaging materials

PVC

NBR,CR

Surface protection layer

PVC

NBR,CR

Environmental conditions

status of use

+5℃--+55℃

-10℃--+65℃

Storage status

-20℃--+65℃

Safety mat switching current

Max.100mA

Protection level

IP65

Maximum humidity (23 degrees)

95% (condensation)

Response time

18ms

Security Classification

EN 1760-1 reset command

stand by

ISO 13849-1:2015

Cat.3

MTTFd

>30 years

B10d

3*107

Nop (accepted)

52560/year

IEC 61508: PFHS

6.99*10-10 1/h (SIL3)

 

Standard safety mat specifications
Chemical barrier of protective layer
Application

As a safety protection switch element, Safety mat must be equipped with safety relays and laid on the ground around dangerous machines and equipment to realize the warning of dangerous areas and the protection of people and machines. Its working principle is: when a person steps on the safety mat, the safety mat senses the pressure change and outputs a switch signal. This signal is detected by the safety relay, and then amplifies and outputs a switch signal, which directly cuts off the power supply of the machinery and equipment, and realizes the protection of people and machines.