Armature Winding Machine for Slot Type Commtator
group nameArmature winding machine
-
Min Order1 piece
brand nameNIDE
modelND-LAW-5B2
payment methodL/C, T/T
-
update timeTue, 19 Jul 2016 11:24:31 GMT
Packging & Delivery
Min Order1 piece
Briefing
Detailed
Three phase Armature Winding Machine / Equipment For Meat Grinder , Mixer Motor
This armature winding machine is used for automatically hook type commutator armature winding, it is suitable for winding medium and big wire diameter armature. Automatic feeding, winding,indexing and wire cutting, only load and unload armature from material loader. Equipped with touch screen and PLC, winding parameter could be set and modified on the screen. We also have armature winding machine equipped with conveyor, operator only need to put several pieces of armature on the conveyor at one time, then machine will finish all the armatures automatically. Below parameter is our standard machine, we could produce machine according to customer's armature accordingly.
Technical Parameter:
Item | Specification |
Wire diameter | Magnetic hysteresis method:0.16~0.55mm |
Electric control method:0.30~0.85mm | |
Armature O.D range | 20~60mm |
Stack length | 20~60mm |
Shaft diameter | 3~17mm |
Shaft length | Less than 300mm |
Armature slot | Even slot |
Turn number | 0~9999 |
Commutator diameter | 12~40mm |
Winding speed | 0~3000 rpm |
Winding motor power | 1.5KW * 2 |
Angle detecting speed | 0~3000 rpm |
Angle detecting motor power | 0.75KW *1 |
Air supply pressure | 4~6 Kg/cm2 |
The machine total power | 4.0 KW |
Voltage | Three phase AC380V50/60Hz |
Weight | 1200Kg |
Dimension | 2000(length)X1300(width)X1800(height)mm |
Production efficiency of this machine
Around 1000pcs/8 hours,it is only a rough idea, depends on the armature slots number and turn number.
The operation steps of this machine
Load armature on the shuttle manually, press START button,shuttle will deliver the armature to the winding position, and automatic winding, indexing and wire cutting,after completing, the shuttle will take out the finished armature from winding position, operator unload the finished armature, one cycle is completed.
Common malfunction of this machine
Sometimes, there is servo alarm displayed on the touchscreen. In this case, there will be error code displayed on the servo driver(at the backside of machine), you could identify the problem according to the error code. The most common malfunction is the encoder cable which connects the servo driver and servo motor is loose, just need remove and reinsert the encoder cable again, problem will be solved.
You need a product
You May Like
- Nearest port for product export
- SHANGHAI, NINGBO
- Delivery clauses under the trade mode
- FOB, CFR, CIF, EXW, Express Delivery
- Acceptable payment methods
- T/T, L/C
- Export mode
- Have the independent export and import right