Four working station automatic stator winding and coil inserting machine

Four working station automatic stator winding and coil inserting machine

(1) Main technicaldata
Stator OD：≤φ150mm
Stator ID：≤φ110mm
Stack Height：30-120mm
Height of Coil：3
Appropriate Wire：φ0.18-φ1.2mm
Winding inserting mode：chained   /same core
Pitch time：≤40s/pc
Air Pressure：0.6-0.8MPa
Power supply：380V   50/60Hz 15Kw
Weight ≈4000Kg
Dimension：(L)2000×(W)1300×(H)2300mm

(2) Application
It is suitable for air conditioner motor, washing machine motor, compression motor, fan motor, generator motor and pump motor.

(3)  Machine mainfunction and characteristic
This machine is can do coil winding, coil inserting and wedge inserting. During winding, the coil will be auto wound to the tooling, so as to avoid the wire damage and snap caused by wire cross and disorder during manual wire transfer.  This machine can detect the wire coating damage. The inserting station is controlled by servo motor. The parameter can be set in the touch screen.
With serval station working simultaneously, this machine is efficiency and saves labor cost.

(4)Information needed for Automatic Stator Coil Winding Machine inquiry
It will be better if customer could send us detailed drawing including below information.
1. Stator drawing
2. Stator winding drawing
3. Winding distribution drawing
4. Other technical requirement
If possible, it will be better if customer can send us samples.

(5)Operation step

1. Power on the machine

2. Set the parameter in the touch screen then select it.

3. Thread wire into this machine

4. Put the winding form into the machine

5. Press the start button

6. Machine will do winding process