SEMI-AUTO TWO STATION ARMATURE BALANCING MACHINE

contact supplier

Packging & Delivery

Armature not need to mark, directly put in machine
Single step operate, adjust; malfunction self diagnose.

Function:

Automatic measure, and manually load to weight removing position, the machine automatic remove the weight, then manually load to re-measure.

The working station of this armature balancing machine

Technical parameter:

Items	Details
Type	Two-station(single-tool/double-tools)
Main components configuration	Air cylinder: SMC Actuating motor: Mitsubishi Sensor: KEYENCE,OMRON,CONTRINEX Touchscreen: KEYENCE Control PLC: KEYENCE KV-1000 Stepping motor: Oriental Motor
Rotor radius	Motor rotor below 1.6KG Stack height :20-70mm Rotor diameter: Φ20-45mm, 40-70mm
Balancing speed	1600-2100rpm
Milling method	R-shape or V-shape
Power	AC380V
Air supply	0.4~0.6Mpa
Initial unbalance	In accordance with difference of rotor radius and cutting depth, for example, the max single cut on diameter of 32mm≤500mg, the max single cut on diameter of 40mm ≤800mg
Processing cycle time(type Ⅱ)	12-16s(testing, milling from side to side) Starter armature 25s
One time cutting qualified rate	≧90%
Max removing volume	≧90%
Imbalance repeat measuring precision	≤0.5g.mm (±5mg)
Fixture changing time	Same armature O.D ≤5 mins Different armature O.D ≤ 15 mins
Residual unbalance eccentricity	Better than the national standard for Grade 6.3
Volume (length x width x height)	1300 x 1000 x 1300 mm