good function of pre-bending
high productivity
competitive price
hydraulic drive
rich bending shape
W11s-45x3000 Roll bending machine
Parameter:
Upper roller adding pressure 540tons
Max width of roll board 3000mm
The length of working rolls 3100mm
Max thickness of plate 45mm(carbon steel σs≤ 245Mpa)
Max thickness of plate pre-bending 36mm(carbon steel ≤ 245Mpa)
Up roll diameter ø 590mm.
Down roll diameter ø 340mm
Distance between two down rolls 610mm
Support rolls: One group
Drive speed about 4.0m/min
Hydraulic motor 22KW
Main motor 45KW
Moving motor 11KW
This machine used to make the steel plate into barrel shapeCircular shapeConical sharp, etc.
The upper roller can move vertically as well as horizontally, it can finish the pre-bending work and coiling work at the same machine.
The upper roller is drum-type design, so it has the anti-deformation function. There is equipped the support rollers under the lower rollers it can help to coil the high precision products.
The lower rollers are fixed symmetrically deployed relatively to upper roller, mechanical drive is employed for driving lower rollers. Upper roller ascends or descends at the central symmetric location of the lower rollers; The ascending and descending are hydraulic driven. Upper roller moves to the left or right position to prepare for pre-bending work, the shift position is controlled by the limited switches. The upper roller movement is PLC controlled and LCD display is employed for displacement.
Hydraulic drive is employed for dumping and resetting of the reverse head unit.
Moving control is employed for the control system; You can operation the machine at any position around the machine.