10 - 40,000 metric ton
40,001 - 999,999 metric ton
group namePost
Min Order10 metric ton
brand nameTYTSTEEL
payment methodT/T, L/C, D/P D/A, MoneyGram, Credit Card, Westem Union, Escrow
update timeTue, 22 Apr 2014 14:46:21 GMT
Standard BS, GB, ASTM
Standard BS 1387, GB/T 3091-2001, ASTM A53-2007
Grade 16Mn, A53-A369, ST35-ST52, Q195-Q345
Grade 16Mn, A53(A,B), St37, St42, St45, Q235, Q345, Q195, Q215
Thickness 1 - 8 mm
Section Shape Round
Outer Diameter 20.3 - 273 mm
Secondary Or Not Non-secondary
Application Fluid Pipe
Technique ERW
Certification ISO
Surface Treatment oil painted
Special Pipe Thick Wall Pipe
Alloy Or Not Non-alloy
Special Pipe Thick Wall Pipe
BRAND NAME YSTEEL
Grade 16Mn, A53-A369, ST35-ST52, Q195-Q345
Min Order10 metric ton
1. TOLERANCE
:a) On Specified OD + 0.5mm (Ovality 0.5mm)
:b) The Inside Diameter of ubes shall allow insertion of a guage of 37.7mm dia for a minimum length of 200mm.
:c) On Wall thickness -10%
:d) The mass deviation on a single tube shall not exceed -7.5% of the specified mass.
2. ENDS
: Cut cleanly and nominally square with the axis of the tube and free from excessive burrs.
3. PROPERTIES
:a) Chemical (Maximum) C - 0.20%, SI - 0.05%, MN - 1.40%, P - 0.04%, S - 0.045%, AL - Min. 0.02%.
:b) Mechanical = UTS - 340 to 520 N/mm2, YS - 235 N/mm2 (minimum) & %Elongation on 5.65 S0 - 24% (minimum).
4. FLATTENING TEST WELD AT 90 DEGREES (COLD)
a) For weld : Distance between the platens, measured under load is not greater than 75% of the OD of tube.
b) For Material :Distance Between the platens, measured under load is not greater than 60% of the OD of tube.
5. STRAIGHTNESS
: 1 in 500 (In 1 meter it should not exceed 3mm).
We are manufacteur of galvanized pipe, welded pipe, square/rectangular pipes of various sizes.
Looking forward to your inquiry and cooperation.
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.