Framed E1-4ETH Converter

  • group nameProtocol Converter

  • Min Order1 piece

  • brand nameADK

  • modelET14

  • payment method

  • update timeTue, 29 Jan 2013 19:54:39 GMT

Packging & Delivery

  • Min Order1 piece

Briefing

Model:ET14
Framed E1-4ETH interface converter, 75/120 ohm for E1 port , 220V/DC-48V/DC+24V.

Detailed

E1-4ETHinterface converter is based on FPGA. The device provides thetransition between ITU-T G.703 (E1) standard framed E1 interface and10/100Base-T interface. It is a high capability, self-adaptable long-distanceEthernet bridge. The product is small and with low cost. It is widely used inconnecting between WAN and LAN, monitoring, etc

Feature:

Basedon self -copyright  IC

E1supports any time slot set, the rate is 64K-2048K

Canrealize monitor and control of remote equipment, OAM management data didnot  take up user’s time slot and save E1bandwidth

Havethe function of E1 interface loop back check, avoid the converter crashedbecause of interface loop return;

Haveindicator  when the device is power-offor E1 line is broken or lose signal;

Canset the E1 line that not to send the LINK signal to Ethernet interface while E1line is broken;

TheEthernet interface supports jumbo frames (1916 Bytes);

4Channel10M/100M Ethernet interface can isolate each other to realize communicationindependently;

Ethernetinterface supports10M/100M, half/full duplex auto-Negotiation and AUTO-MDIX(crossed line and straightly connected line self-adaptable );

Provide2 clock types: E1 master clock and E1 line clock;

Havethree Loop Back Mode: E1 interface Loop Back (ANA)、Ethernetinterface Loop Back(DIG)、Command the remoteEthernet interface Loop Back(REM)

Havepseudo random code test function, easy the installation and maintenance;

Provide2 impedances: 75 Ohm unbalance and 120 Ohm balance;

HaveEthernet monitor self-reset function, the equipment will not dead

Ethernetinterface supports the counters of receiving and transmitting frame, receiveswrong frame counters. E1 interface supports the counters of receiving wrongframe;

Realizemonitor of remote equipment temperature and voltage from local equipment;

SupportSNMP Network Management;

Canform the structure: Ethernet E1 Bridge(A)---E1Optical Fiber Modem(B)---Ethernet OpticalFiber Modem (C)

 

Parameter

  

Item

Specification

LAN Port

Interface rate

10/100 Mbps, half/full duplex  auto-negotiation

Interface Standard

Compatible with IEEE 802.3, IEEE 802.1Q  (VLAN)

MAC Address Capability

4096

Connector

RJ45, Support Auto-MDIX

E1 port

Interface Standard

Comply with protocol G.703

Interface Rate:

2048Kbps±50ppm

Interface Code

HDB3

E1 Impedance

75Ω (unbalance), 120Ω (balance)

Jitter tolerance

In accord with protocol G.742 and G.823

Allowed Attenuation

0~6dBm

Power

Power supply

AC180V ~ 260VDC –48VDC +24V

Power consumption

≤3W

Dimension

Mini Type

216widthX140depthX31heightmm  &   0..8kg

19 inch 1U

483widthX138depthX44heightmm  &   1.2kg

Working  environment

Working temperature

 -10°C ~ 50°C   14°F  ~ 122°F )

Working Humidity

5%~95 % (no condensation)

Storage temperature

-40°C ~ 80°C   -40°F  ~ 176°F 

Storage Humidity

5%~95 % (no condensation)

 

Application

Order Information

 

Item  Name

Description

ET14/AC

E1 - 4 x ETH interface converter, 75/120  ohm for E1 port , 220V

ET14 /DC/48

E1 - 4 x ETH interface converter, 75/120  ohm for E1 port , DC-48V

ET14/DC/24

E1 - 4 x ETH interface converter, 75/120  ohm for E1 port, DC+24V