silicone rubber RTV for polyresin angel moulding

Models of silicone rubber RTV for polyresin angel moulding

Model:  638# silicone rubber RTV for polyresin angel moulding

Appearance: white

Viscosity (cs): 25000

Hardness (A): 20-22

Tensile strength(kgf/cm² ) ≥35

Tear strength (kgf /cm):≥25

Elongation break(%):≥500

Retractility (%):≤0.2

Curing agent mixed rate (%):2-3

Operate time (min): 30

Curing time (hours): 2-4

Model:  728#

Appearance: white

Viscosity (cs): 18000

Hardness (A): 25

Tensile strength(kgf/cm² ) ≥35

Tear strength (kgf /cm):≥22

Elongation break(%):≥320

Retractility (%):≤0.2

Curing agent mixed rate (%):2-3

Operate time (min): 30

Curing time (hours): 2-4

Model:  788# silicone rubber RTV for polyresin angel moulding

Appearance: white

Viscosity (cs): 12000-15000

Hardness (A): 28-32

Tensile strength(kgf/cm² ) ≥35

Tear strength (kgf /cm):≥20

Elongation break(%):≥470

Retractility (%):≤0.2

Curing agent mixed rate (%):2-3

Operate time (min): 30

Curing time (hours): 2-4

Features of silicone rubber RTV for polyresin angel moulding:

(1) Silicon rubber for pad printing with SGS and ROSH approval

(2) Curing agent arrange together as free charged

(3) In liquid form and in various colors

(4) With an exceptional fluidity and good operability.

(5)Temperature and deformation resistance as well as low shrinkage.

(6) High duplication times.

(7) Sample orders are available

(8) MOQ: 200KG

silicone rubber RTV for polyresin angel moulding instruction:

1. Component A is white flowing liquid and component B is the curing agent.

2. For example, take silicone rubber of 100g and add 2g curing agent for mixing evenly (silicone rubber and curing agent must be measured accurately).

3. After the silicone rubber and the curing agent are completely mixed, put the silicon into a vacuum machine for deairing to remove the bubbles.

4.  After deaired, pouring the liquid silicone rubber into the product to be duplicated or into the mold frame. If you don't have vacuum machine, please add 1.2% or 1.5% curing agent so that the bubbles can bubble itself.

5. Since the less curing agent you add, the slower the mould will curdle, the bubbles will bubble out itself.

Any questions for silicone rubber RTV for polyresin angel moulding , pls feel free to contact Taylor:

Mob: +86-18938867522

Tel: + 86-755-89948006

E-mail: hyw(at)szrl(dot)net

Skype: taylordl828

Facebook: hyw(at)szrl(dot)net