200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameRTV-2 silicone rubber for molds making
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelRTV-620,HY638
payment methodL/C, T/T, Western Union
update timeTue, 26 Nov 2013 08:57:33 GMT
Shaping Mode Silicone Mould
Product Material RTV-2 silicone rubber
Product RTV-2 silicone rubber
color white
certificate RoHS, MSDS, SGS, ISO9001:2000
Min Order200 kilogram
RTV-2 silicone rubber for resin plastic product mold making
Usage:
For toy gifts and craftwork gift, products with complex fine details, and made in pouring way.
Description:
HY-638# silicon rubber is mainly used for toy gifts and craftwork gifts with the advantages of good tensile strength, high tear strength, high temperature resistance, high duplication times and repeated use, etc. It is suitable for small products or fine and precision products which is difficult to demould. This silicone rubber is one of the products with the highest use level in the production of craftwork gifts and the shrinkage is up to 2.
Applications:
Poly technique, lightings, candles, and molds in multiple pieces for large products.
Standard Datasheet:
Model | Appearance | Viscosity (cs) | Hardness (Ao) | Tensile Strength (kgf/c) | Tear Strength (kgf/) | Elongation (%) | Mixing ratio(%) | Operating Time(H) | Curing Time(H) |
638 | White | 14000~16000 | 25~28 | ≥35 | ≥25 | ≥500 | 2~3 | 0.5 | 2~4 |
General Description:
RTV-2 molding silicon rubber and silicone rubber are general called two-component room temperature vulcanization silicone rubber with excellent fluidity and good operational performance. Add curing agent of 2%-3% at the room temperature, the silicone rubber is still operational within 30 minutes,and in 2-3 hours, an elastic silicon mold will be obtained with resistance to deformation, high-temperature, acid and alkali and expansion. The silicone rubber is mainly applicable to mold duplication of poly crafts, resin craftworks, lightings, candles, etc. and fabrication of precision molds.
Operation Instruction forRTV-2 Molding Silicone Rubber:
The product is white or red flowing liquid with general hardness of 2250A°after curing . If the customer wants to make large products and large size molds, the mold should be made of silicone rubber with high hardness. On the contrary, if the mold with fine and precision patterns , it should be made of silicon with low hardness. The amount of the curing agent depends on the actual requirements of the customer. If molds requiring fast drying and demould, more curing agent is needed; contrarily, if molds requiring slower drying and demould, less curing agent is needed.
(Note: our company does not recommend you to add silicone oil. If a special soft silicon mold or fine detailed and complex patterns products are required, 5%-10% silicone oil can be added to soften the mold for easy demould.)
Any more information , pls feel free to contact Ms Shirley
also call office no. 0086-755-89948019
Mob:86-15220170905
Skype: patch8826
Write to hyh(at)szrl(dot)net
Welcome to our website www dot szrl dot net
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.