Pouring Mold Silicon Rubber for balustrades

                                              Pouring Mold Silicon Rubber for balustrades

Pouring Mold Silicon Rubber for balustrades Application : including making molds for reproducing prototypes, furniture, sculpture architectural elements with a variety of materials including wax, gypsum, low melt alloys/metals and urethane, epoxy or polyester resins

Steps of how to make silicone molds by Pouring Mold Silicon Rubber :

First .Preparing the Model: Porous surfaces, such as wood, should be dried and sealed. Also applying a release agent, such as petroleum jelly will aid in easy release of a silicone mold. Because silicone can sometimes bond to surfaces which contain silica, such as glass, cements and natural stone; it is recommended to do a spot test for possible adhesion.

Second ,Mixing and Curing: This material can readily accept pigments.Stirring individual components before use is recommended. Make sure to weigh and measure accurately. Close containers tightly after use. Products should be stored in their original, sealed containers in an environment that does not exceed 90F. Under these conditions, the product will achieve the expected shelf life. Please refer to the individual products technical sheet to determine the products expected shelf life.

The following procedure is an example of a 100:2 mix ratio addition cure product. Please refer to the product’s technical sheet for mix ratio information,

Third : pour the mixed silicone rubber into the molds , when it cured , it can be demould .

Need more information or price list for reference,please feel free to contact Miss Caroline:

TEL: +86-755-89948019

Mobile: +86-18938867567

Skype: cathy19900719

Email: hysf(at)szrl(dot)net

Website : www(dot)szrl(dot)net