100 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameRTV-2 silicone rubber for molds making
Min Order100 kilogram
brand nameHong Ye silicone rubber
modelRTV-625
payment methodT/T, L/C, Westem Union
update timeTue, 05 Nov 2013 13:01:04 GMT
Model 625#
Appearance white
Mixing proportion of curing agent (%) 4%
Hardness (A°) 24~26
Tear-strength (kgf /cm ) ≥27
Elongation-break(%) ≥ 450
Retractility(%) ≤0.25
Density ( g/cm) 1.08
Operating time (mins 25 C) 30~50
Curing time(hours 25 C) 4-5
Min Order100 kilogram
1 Two part of Liquid RTV Silicone for Mold Making :
RTV silicone is mainly be used for mold making for poly resin crafts, PU crafts, PU resin Crafts, gypsum/ plaster moldings, light and candle crafts, Statues and , cement, concretes and so on
2 Features of Liquid RTV Silicone for Mold Making:
1) Resistance to deformation and expansion
2) Low shrinkage
3) Excellent molding times.
4) Easy operation
5) Low viscosity, good fluidity
6) High molding times
3 Operation of Liquid RTV Silicone for Mold Making
If wants to make large products and large size molds, the mold should be made of silicon rubber for mold making with high hardness. On the contrary, if the mold with fine and precision patterns, it should be made of silicon with low hardness. The amount of the curing agent depends on the actual requirements of the customer.
Operations
Step One: Take 100g of part A and add 2g of part B and mix the silicon rubber and curing agent evenly.
Notes: Molding silicon rubber is a kind of flowing liquid and it contains two parts. Part A is a kind of white flowing liquid and part B is the curing agent. Remember to mix part A and part B evenly, otherwise the silicon rubber will be partly solidified and this will give birth to difficulties in your final operation. What’s more, the finished moulds will meet a short life. All of these will cause a waste of silicon rubber.
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes. Otherwise, it will cause cross linking reaction, and no more further steps will be available.
Step Three:
Pouring molding process or Brushing way molding process
Any questions of Silicone Rubber, please feel free to contact Miss Leah:
TEL: 086-755-89212382
FAX: 086-755-89948030
MOBILE: 086-189 3886 7561
Website: www(dot)szrl(dot)net
E-MAIL: hyji(at)szrl(dot)net
Skype: leahchou1214
QQ: 189 3886 7561
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.