molding silicone rubber

                                                                                molding silicone rubber                                  

Specifications of molding silicone rubber:

liquid silicone for insoles:
a. easy-operation
b.light viscosity and good flowability
c.high tear strength
d.no deformat

 liquid silicone for insole 

Application of molding silicone rubber:

1.molding silicone rubber is suitatble for toys, gifts,human replica mold making

2.molding silicone rubber is used for decoration, plate engrave,art crafts mold making

3.molding silicone rubber is maily applied for resin crafts, unsaturated resin crafts mold making

4.molding silicone rubber can be used for poly resin crafts, candle crafts, plastic crafts mold making

5.molding silicone rubber is good for stationeries, plaster crafts, Bunddhist statue crafts, etc mold making

Features of molding silicone rubber

a. good characteristics of easy-operation

b.light viscosity and good flowability

c. favorable tension

d. low shrinkage

e. no deformation

f. high temperaure resistance, acid and alkali-resistance and ageing resistance

molding silicone rubber operations

If the customer wants to make large products and large size molds, the mold should be made of silicon rubber with high hardness. On the contrary, if the mold with fine and precision  patterns, it should be made of silicon with low hardness. The amount of the curing agent depends on the actual requirements of the customer. 

Brief Introduction to molding silicone rubber

molding silicone rubber is generally named two-components silicone rubber, Part A is a flowable liquid, part B is the curing agent. It features an exceptional fluidity and good operability. The mixing ratio is 1:1, mainly be suitable for making molds application.
Note:silicone oil with 100cst is also available.

Molding silicone rubber operations:

mould silicone rubber is a kind of flowing liquid, and it consists of two component, part A is aflowable liquid silicone rubber, part B is the curing agent.
Firstly, after your previous work of dealing with the origianal moldel, take some liquid silicone rubber, add 2%~3% cuing agent of the amount of silicon and mix them evenly.
Then after vacuum-pumping the mixture, you cn pour it into the mold frame. The sillicone mold will cured in 2~3 hours.
Note: the time for vacuum-pumping should be less than 3-5mins, othewise, once the silicone rubber has cross-link reaction during vacuumizing. it will not be operated.

Any questions of molding silicone rubber , please feel free to contact Ms. Caroline:

TEL: +86-755-89948019

Mobile: +86-18938867567

Skype: cathy19900719

Email: hysf(at)szrl(dot)net

Website : www(dot)szrl(dot)net