Brushable silicone rubber
- US $9.98
200 - 40,000 kilogram
- US $6.98
40,001 - 999,999 kilogram
group nameRTV-2 silicone rubber for molds making
-
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelmolding silicone rubber
payment methodT/T, L/C, Westem Union
-
update timeTue, 05 Nov 2013 13:05:42 GMT
Paramtents
Certification SGS,MSDS,RoHS
HARDNESS 18-40A
Mixing Ratio 2%
Type silicone rubber
Appearance Fluid
Application Mold making materials
Certificated RoHS, Reach, MSDS,SGS.ISO9001:2008
EINECS No 39100000
Purity 100%
Curing agent 5%for free charged
Packging & Delivery
Min Order200 kilogram
Briefing
2.light viscosity and good flowability
3.low shrinkage
4.favorable tension
5.high hardness for large crafts
Detailed
Application of brushable silicone rubber:
brushable silicone rubber is mainly applied for making various molds:
brushable silicone rubber can used to reproduce concrete or cement, gypsum, gypsum, architecture, decorative arts and crafts, big statue, cultural relic product, etc.
brushable silicone rubber can used to reproduce poly resin, epoxy, polyurethane-polymer, plastic toy, gift and stationery.
brushable silicone rubber can also used to reproduce soaps, candle & lighting.
FEATURES of brushing silicone rubber:
brushable silicone rubber has an exceptional fluidity and good operability.
- brushable silicone rubber has good Temperature and deformation resistance as well as low shrinkage.
- brushable silicone rubber has High duplication times
Operation step for brushable silicone rubber:
- Step One to use brushable silicone rubber: Take 100g of part A and add 2g of part B and mix the silicon rubber and the curing agent evenly.
- Step Two to use brushable silicone rubber: vacuum pumping
- Without exception, this takes less than 10 minutes. Otherwise, it will cause cross linking reaction, and no more further steps will be available.
- Step Three to use brushable silicone rubber: Brushing cast & Perfusion Molding operation.
3.FOQ of Buy silicone for brushable silicone rubber:
Why does the RTV-2 silicone elastomers have few mold making times?
The RTV-2 silicone elastomers mold has few molding times is due to follwoing reasons: adding too much silicone oil which will destroy the molecular of silicone rubber; making the mold for small and fine detailed products with higher hardness silicone rubber which is easy to break; making the mold for large products with soft silicone rubber which will reduce the tensile and tear strength of the mold, and the mold will have deformation. Thus, we should take the proper silicone rubber to make the mold for suitable products.
You need a product
Related Searches
You May Like
- Nearest port for product export
- Shenzhen, Guangzhou, Xiamen, Shanghai
- Delivery clauses under the trade mode
- FOB, CFR, CIF
- Acceptable payment methods
- T/T, L/C, Westem Union
- Export mode
- Export through agents