HY-E642 Addition Molding Silicone for precision molds copied

 HY-E642 Addition Molding Silicone for precision mold

Nontoxic & reach to Food grade Applications,

HY- E642# addition molding silicone could be mainly used for making concrete stones, precision molds, PU molds, resin molds, gypsum casting, candle molding,for life casting, fabric finishing, seal for electronic components and solar circuit board, trademark decoration. etc.

 Nontoxic & reach to Food grade Description

HY- E642# addition molding silicone is generally named two-components silicone rubber, Part A and part B. It features an exceptional fluidity and good operability. The mixing ratio is 1:1,mainly be suitable for making molds application.

OPERRATING INSTRUCTION of Nontoxic & reach to Food grade:

1. Stir part A and part B with right mixing ratio (1:1) evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer, you can just pour the mixture slowly from the corner so that less bubbles caused)

2. Enclose the product (the original model) with four plastic plates or wooden plates.

3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.

4. Pour the mixture with correct mixing ratio into the model frame.

After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .

Nontoxic & reach to Food grade SHELF LIFE:

 Twelve (12) months from date of shipment when stored at 24°C in original unopened packages.

Need any more informatio on Addition silicone rubber mouldings,pease feel free to contact with us.

Contact Person:  Allen

Tel: +86-755-89212365

Fax: +86-755-89948030

Mob:+86-18938861889

 Nontoxic & reach to Food grade