200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameAddition cure silicone rubber
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelE635/642# Silicone Rubber
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 16:47:28 GMT
An exceptional fluidity Good operability
Min Order200 kilogram
Industrial Mold Making RTV Silicone Rubber Performance:
Industrial Mold Making RTV Silicone Rubber,Our E series rtv-2 addition cure mold making silicone is with the all the advantage of rtv-2 condensation cure silicone rubber, but is also featured with lower shrinkage and low viscosity, good fluidity; Without releasing any by-product with low molecular weight, and it's cured from top to bottom, from the inside and outside simultaneously, so it will be deeply-cured. The E sereise addition cure silicone will not meet the problem of degradation or sticky molds because of the existence of by-product of small molecules under certain conditions, (such as closed, high temperature).it's very suitable for all kinds of mold with a variety of sizes, shapes and large sized plaster, cement,ect molds making.
Industrial Mold Making RTV Silicone Rubber Main applications:
Industrial Mold Making RTV Silicone Rubber,This product can be used in not only the field of common RTV-2 moldmaking silicone. As the vulcanizing reactions of addition cure silicone is fundamentally different from tin cure silicone’s, it has no problem of deep vulcanize or reverse reaction, ect problem. Therefore, our addition cure silicone is particularly applicable for large stones, plaster and cement product replication. It features with lower viscosity, high strength , good fluidity, can also be very suitable for precision complex pattern of the original copy.
Industrial Mold Making RTV Silicone Rubber Packaging, storaging and transportation
1. This product need to be packed in clean, dry and sealed steel cans or drums. Part A and B need to be packed seperately. Usually it is packed in 5kg/can, 20 kg/drum, or 200 kg/drum .
2. Please keep the material in a cool and dry place. Specially note that the silicone should not touch or mix with compounds including nitrogen, phosphorus, sulfur, tin, lead or metal organic acid. Otherwise, the catalyst will be poisoned, then the silicone can not be cured or just particially cured. For specific precautions, please refer to the instructions in Electronic Potting Silicone part.
For specific precautions, please refer to the instructions in Electronic Potting Silicone part.
3. The goods is NOT subject to IMDG.The shelflife is 18 months from the date of production.And it still can be used after expired, when retest to be qualified.
Technical Datasheets for Industrial Mold Making RTV Silicone Rubber
MODEL | COMPOUNENT | BEFORE CURING | AFTER CURING | ||||||
Appearance | A Viscosity cP(25°C) | B hardness (shore A) | C Pot life min(25°C) | D initial curing (h) | Tensil- strength (Mpa) | Tear- strength (kN/m) | Elongation (%) | ||
E635# | A+B | translucent | 30000±8000 6000±2000 10000±3000 | A+B (1:1) 35±2 | A+B (1:1) 30±10 | A+B(1:1) 3±1 | A+B (1:1) ≥4.0 | A+B (1:1) ≥7 | A+B (1:1) ≥200 |
E642# | A+B | translucent | 30000±8000 6000±2000 10000±3000 | A+B (1:1) 42±2 | A+B (1:1) 30±10 | A+B(1:1) 3±1 | A+B (1:1) ≥4.0 | A+B (1:1) ≥7 | A+B (1:1) ≥200 |
Any questions,please feel free to contact Ms Judy
MOBILE: 0086-18938867591
QQ: 18938867591
Skype: judy.zhao723
Email: hyja at szrl dot net
WEB: www dot szrl dot net
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.