Additional cured liquid silicon rubber

                                                   Additional cured liquid silicon rubber

Applications of the Additional cured liquid silicon rubber:

HY- E642# addition liquid silicon  could be mainly used for making concrete stones, precision molds, PU molds, resin molds, gypsum casting, candle molding,for life casting, fabric finishing, seal for electronic components and solar circuit board, trademark decoration. etc.

Description of Additional cured liquid silicon rubber:

HY- E642# addition  silicone rubber  is generally named two-components silicone rubber, Part A and part B. It features an exceptional fluidity and good operability. The mixing ratio is 1:1,mainly be suitable for making molds application.

OPERRATING INSTRUCTION of Additional cured liquid silicon rubber:

1. Stir part A and part B with right mixing ratio (1:1) evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer, you can just pour the mixture slowly from the corner so that less bubbles caused)

2. Enclose the product (the original model) with four plastic plates or wooden plates.

3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.

4. Pour the mixture with correct mixing ratio into the model frame.

After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .

SHELF LIFE:

Twelve (12) months from date of shipment when stored at 24°C in original unopened packages.

More information about the Additional cured liquid silicon rubber, please don't hesitate to contact with Miss Caroline at any time !

TEL: +86-755-89948019

Mobile: +86-18938867567

Skype: cathy19900719

Email: hysf(at)szrl(dot)net

Website : www(dot)szrl(dot)net