Silicone rubber for mold making plaster statues

Silicone rubber for mold making plaster statues  

Introduction

This product is two-component, RTV silicone rubber which with long service life and durable, especially suitable for the mold manufacture of silicone rubber.

Feature 

Superior liquidity; Easy to operation; Deep vulcanization permission; Stable molding size; Heat and chemicals resistance; Good physical properties

Application

Especially suitable for the molding manufacture of UPR and other craft products,mold making silicone

How to use

1.The cast pouring, for example:

Prepare a frame, fix the prototype for copy into the frame, (if the prototype’s material is glass or ceramic, the release agent is necessary to prevent sticking.

2. Take 2~3%curing agent of RTV, and mix it evenly with rubber.

3.Vacuum defoaming in 1~3 min,inject the rubber into the type box, then vacuum defoaming again, curing 24 hours in nature room temperature, use it after demold.

4. Demold after 3 hours’ room temperature curing, and then use it after 24 hours’ keep mold under the same condition.

Storage

Sealing storage in the environment of dry, cool and ventilated. storage temperature should be kept during 0~40°C.

Shelf-life

4 months under above conditions. It remain can be used after shelf life if the technical data is qualified.

Package

5Kg/barrel,25 Kg/barrel

Any more information pls kindly coontact with Ms Apple:

Tel:86-755-89948019

Mobile:86-15889446131