200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameAddition cure silicone rubber
Min Order200 kilogram
brand nameHong Ye silicone rubber
model615# RTV-2 molding silicon rubber
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 17:21:28 GMT
color White, Red, Green, Blue
features light viscosity,non-deformation,high duplication times
Min Order200 kilogram
APPLICATIONS OF RTV MOLDING SILICON RUBBER:manual mold design, PVC plastic mould, cement product mould, low melting-point alloy mould, alloy toy crafts, plastic toy, craftwork, gift and stationery, big statue, cultural relic duplication, pad printing orientation, electronic appliances vibration resistance, etc.
RTV MOLDING SILICON RUBBER FEATURES: 1. Two-part silicon rubber:flowable liquid silicon and curing agent. 2. An exceptional fluidity and good operability. 3. Temperature and deformation resistance as well as low shrinkage. 4. High duplication times. CURING AGENT ADN SILICON MIXING
PROPORTION AND THEIR REACTION:
1,Added with 1% of curing agent, silicon can still flow within 2.5 hours, mold can be released in 6-8 hours.
2,Added with 2% of curing agent, silicon can still flow within 50 minutes to 1 hour, mold can be released in 2-3 hours.
3,Added with 3% of curing agent, silicon can still flow within 28-30 minutes, mold can be released in 1.5-2 hours.
4,Added with 4% of curing agent, silicon can still flow wtithin 10-15 minutes, mold can be released in 1-1.5 hours. CURING AGENT OF RTV MOLDING SILICON RUBBERThe mixing ratio of silicon rubber and curing agent is 100:3-5.For example, if we add 100 kilogram RTV silicon rubber, please add 3-5 gram curing agent. Then please mix them evenly. Pay attention: Please mix them evenly, or the quality of silicon rubber will be destroy for uncured silicon rubber part.
RTV MOLDING SILICON RUBBER:1. RTV molding silicon rubber with flowable liquid silicon rubber and curing agent.2. RTV molding silicon rubber cures at room temperature within 2-4 hours.3. RTV molding silicon rubber with an exceptional fluidity and good operability, easy to demold.4. RTV molding silicon rubber with good tensile and tear strength, low shrinkage.5. RTV molding silicon rubber with high duplication times. FAQs in the use of RTV molding silicon rubber Why is the tear strength of the RTV molding silicon rubber mold weak?
In order to reduce the viscosity of RTV molding silicon rubber and pursue a good quality, you may add a lot silicon oil into the RTV molding silicon rubber when molding. In fact, it might have just the opposite effect. The tension and the tear strength of the RTV molding silicon rubber molds will be reduced badly with the addition of silicon oil. And the RTV molding silicon rubber molds will be in a weak and flimsy manner.
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.