addition cure liquid silicone rubber for molding

Application of addition cure liquid silicone rubber for molding

addition cure liquid silicone rubber for molding is mainly applied for making various molds,such as reproduction of concrete or cement , poly resin, epoxy, polyurethane-polymer, plaster, gypsum, soaps, candle & lighting, architecture, decorative  arts and crafts, plastic toy, gift and stationery, big statue, cultural relic product, etc..

Features of addition cure liquid silicone rubber for molding

resistance to deformation,

high-temperature resistance

acid-alkali resistance

expansion as well as high reproduction times,

good tensile strength ,

Strong Tear strength

Good elongation

Low shrinkage

Long shelf time which can reach at least 1 year

Operation guide of addition cure liquid silicone rubber for molding

1. Stir part A and part B with right mixing ratio (1:1) evenly. And get the mixture for vacuum-pumping. (If there is no vacuum machine, just mix less catalyst)

2. Clean your products and brush a layer of release agent (detergent or soap water) on your product.

3. Pour the mixture with correct mixing ratio into the model frame.

After about 3-5 hours, when the silicone get cured, take out the original mold, and there is th finished silicone mould.

Shelf life of addition cure liquid silicone rubber for molding

addition cure liquid silicone rubber for molding, shelf life is Twelve(12) months from date of shipment when stored at 24 C in original unopened packages.

Package of addition cure liquid silicone rubber for molding

Packed in clean 20kg/pail, 200kg/pail.

Any questions about silicone rubber, please feel free to contact Ms Vicky:

TEL: 086-755-89212369

FAX: 086-755-89948030

MOBILE:086-18938867569

E-mail: hyz(at)szrl(dot)net

Skype: vickylyr