fiber glass cloth silicone rubber

Fiberglass cloth dipping, silicon cloth for making electronic circuit board, brushing silicone.

Description:

   HY-961 Silicon for fiber glass cloth can be divided into general purpose grade and flame resistant one.It features with low viscosity, exceptional fluidity and excellent operability.It is suitable for brushing, and can be cured fastly under high temperature.It has excellent heat resistant and flame resistant properties after cured, data can reach to grade UL94V-0.

Features:

   Excellent heat resistance,flame resistance,ultraviolet resistance, weatherability and anti-ageing, It can be used for a long time under the temperature of -100C~+200C,which features with good waterproof and moisture proof properties,air permeability.It is not harmful to human being.

Applications:

   It's especially suitable for coating for fiber glass cloth or some other fabrics.

Typical properties:

Item No.	HY-961
Component	A	B
Appearance(liquid)	white or gray	transparent
Mixing ratio	9	1
Viscosity (Pa.s)	50~65	8±2
Pot life  (25C)hrs	12-24
Curing time (100°C)mins	20~25
Hardness(Ao)	20±2

 

Using instructions:

    1. Pouring component A into the jar,thinning with 120# silicon oil according to customers'requirements.Mixing it with glass stick by hand and then by mixer.

    2. Mixing the component A and B evenely according its mixing ratio,and brush the mixed silicon to the fabrics'surface.

   3. We advise to heat the silicone rubber under temperature of 100C~120C for 20~25mins to cure if excellent bonding properties required.

Package,storage and precuations:

    1. Component A and B is packed in plastic drums seperately.

    2. It is non-dangerous goods,it should be stored in air-tight seal packing and cool place.It should be kept from the sun and rain.

    3. The shelf life is about 6 months.

    4. Component A and B should avoid to mixing rapidly for long time which makes it reach to high temperautre(38C),thus short pot life and fast curing appearing.

    5. This product is forbidden to mix with organic compounds of condensation cure silicon,otherwise, the silicon will not cure, and also should not mix with organic compounds containing S, P, N as well as metallic salt of organic acids. It also will cause this product cure uncompletely or not cure.

Any more information , pls feel free to contact Ms Shirley

also call office no. 0086-755-89948019

Mob:86-15220170905

Skype: patch8826

Write to hyh(at)szrl(dot)net

Welcome to our website www dot szrl dot net