segmented tire molding silicone rubber

 ***Welcome to my store***
                                                                   If you have any question, Pls feel free to ask ~ 

                                          Segmented tire mold silicone  

1)Description of segmented tire mold silicone

HY- E series addition molding silicone is generally named two-components silicone

rubber, Part A and part B. It features an exceptional fluidity and good operability.

The mixing ratio is 1:1 (10:1),mainly be suitable for making molds application.

2)Typical Applications of segmented tire mold silicone

HY- E series addition molding silicone could be mainly used for making concrete

stones, wax molds, PU molds, resin molds, gypsum casting, candle molding and

chocolate , candy and any other FDA food product mold making,prototyping etc.

HY-E620 Silicone Rubberis has been used for years to make tire pattern molds .

3) Technical Parameters of segmented tire mold silicone  

(Please note: the above data for this product in 25°C temperature, 55percent humidity conditions, for reference.

The accurate data is measured by customers when using.)

4)Operation instruction of segmented tire mold silicone

1. Pls clear the model and tool totally before operation to prevent cure inhibition.

2.Weigh the two part correctly by electronic weight in two separate container .

3. Mixing the two part in 1:1/10:1 and stir part A and part B evenly in 2-3 minutes .

4.And get the mixture for vacuum-pumping for de-air the bubble in around 2-3

minutes . (If there is no vacuum machine, pls pour the mixture carefully and slowly

down the side of the mold frame so that less bubbles caused)

5. Enclose the product (the original model) with four plastic plates or wooden plates.

6. Clean your products and brush a layer of release agent(detergent or soap water) on

your product.

7. Pour the vacuumed mixture into the model frame from the side of the mold frame .

Notice of segmented tire mold silicone

As our E-series silicone is platinum cure silicone , which is very easy to cause

cure inhibition , so pls do remember thoroughly clean the model and tool before

operation . Besides , pls avoid the liquid E-series silicone contact or mix with the

following material , otherwise the silicone won’t be cured :

1. Liquid condensation silicone ( condensation silicone not completely cured or organic

tin compounds )

2 .Sulphur, sulfide and sulfur rubber materials.

3. Amine compounds as well as contains the amine materials.

4 .Pewter solder flux.

Company Profile

We are manufacturer specializing in molding silicone rubber, mold duplicating rubber for resin craft makers,

 special silicon for manual molding, shoe mold rubber, pad printing silicone, encapsulants and potting compound,

addition cure liquid silicone,baby  nipple silicone rubber ,lifecasting,food grade silicone rubber, trademark silicone rubber, 

HTV silicone rubber, lead-zinc alloy crafts silicone rubber, hot stamping silicone plate, hot stamping silicone roller, gross rubber, 

RTV-2 silicone rubber, silicone molds, silicone products,etc.

silicone rubber package details

silicone rubber certifications:

SGS

ROSHS

FDA

ISO900 

We can provide good solution for you , if you have question about how to make silicone mold , or how to use the silicone mold ,and any problem about the silicone mold , pls kindly feel free to let us know , we will be happy to serve you.  

Any questions of  segmented tire molding silicone rubber, please feel free to contact Kaimi:

MOBILE:0086-18938867528

E-MAIL: hyju(at)szrl(dot)net

skype:hyjiangying