silicone mold making rubber for pastone veneer molds

FOB Price

US $12.28
200 - 40,000 kilogram
US $9.28
40,001 - 999,999 kilogram

group nameRTV-2 silicone rubber for molds making
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelHY-E642# silicone rubber
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 19:13:07 GMT

contact supplier

Paramtents

Hardness(shore A) 40±2
MOQ 200kg
Tensile strength (kgf/cm2) 50±5
Viscocity Part B(mPa.s) 23000±2000
Color Any color
Viscocity Part A(mPa.s) 23000±2000
Pot life/working time (mins) 30-40
Features liquid
Shrinkage rate (%) 0.1
Mix ratio(A:B) 1:1/10:1

Packging & Delivery

Min Order200 kilogram

Briefing

silicone mold making rubber for stone veneer molds
Low shrinkage
Favorable tension
No deformation
Favorable hardness

Detailed

silicone mold making rubber for pastone veneer molds

Description of silicone mold making rubber for pastone veneer molds

HY- E series addition molding silicone is generally named two-components silicone

rubber, Part A and part B. It features an exceptional fluidity and good operability.

The mixing ratio is 1:1 (10:1),mainly be suitable for making molds application.

Typical Applications of silicone mold making rubber for pastone veneer molds

HY- E series addition molding silicone could be mainly used for making concrete

stones, wax molds, PU molds, resin molds, gypsum casting, candle molding and

chocolate , candy and any other FDA food product mold making, prototyping etc.

silicone mold making rubber for pastone veneer molds

Characteristics of silicone mold making rubber for pastone veneer molds

*low shrinkage (less than 0.1% )

*high tensile and tear strength with high copy times

*easy for operation (mixing ratio at 1:1 /10:1)

*very good flow and easy for pouring operation

*Fast and non-shrink cure at room temperature which can be accelerated considerably by the application of heat

Technical Parameters of silicone mold making rubber for pastone veneer molds

Model	E642 A/B
Mixing proportion	1:1 or 10:1
Hardness (A°)	40±2
Density ( g/cm 3 )	1.10
Pot life (under room temperature 23°C)	30 mins
De-mold time (hour)	4~6
Viscosity (23 C°,mPa.s)	6000±2000
Color	Translucent
Tear-strength (kgf/cm)	≥15
Tensile strength(kgf/cm2)	≥60
Elongation-break(%)	≥ 290
Linear shrinkage (%)	<0.1

(Please note: the above data for this product in 25°C temperature, 55percent humidity conditions, for reference. The accurate data is measured by customers when using.)

silicone mold making rubber for pastone veneer molds

OPERRATING INSTRUCTION for silicone mold making rubber for pastone veneer molds :

1.Stir part A and part B with right mixing ratio evenly. (E630# is 1:1) and get the mixture for vacuum-pumping.(If there is no vacuumizer,you can just pour the mixture slowly from the corner so that less bubbles caused).

2.Enclose the product (the original model) with four plastic plates or wooden plates.

3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.

4.Pour the mixture with correct mixing ratio into the model frame.

After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .

SHELF LIFE of silicone mold making rubber for pastone veneer molds:

Twelve (12) months from date of shipment when stored at 24°C in original unopened packages.

PACKAGE of silicone mold making rubber for pastone veneer molds:

Packed in clean 25kg/pail, 200kg/pail.

Any more information abt silicone mold making rubber for pastone veneer molds, pls feel free to contact Ms. Bella:

Mobile:0086-18938867572

Tel: 0086-755-892948006

Fax: 0086-755-89948030