300 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameelectronic potting silicone rubber
Min Order300 kilogram
brand nameHong Ye silicone rubber
modelHY-9301 silicon
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 19:21:54 GMT
color:any transport:by sea
Certifications:RoHS.SGS ISO9001:2000 provide curing agent for free
Min Order300 kilogram
Product Feature Silicone sealant adhesive for LED
RTV-2 Silicone sealant is a newly insulating material silicon of silicon compounds.
It cures with no heat, no corrosion and little shrinkage. It can be applied to the sealing and pouring of various electronic components, and then forming insulation system.
Features Silicone sealant adhesive for LED
1,Room temperature vulcanize, and easy to operate;
2,Maintain flexibility at a wide temperature range, and excellent insulation performance;
3,Waterproofing, moisture-proof, mouldproof, dustproof, and fixed components;
4,Resistance to Chemical dielectric, anti-yellowing, resistance to climate ageing.
9301 Silicone Sealant with high quality
Typical Application
9301 is suitable for bonded seal of electronic components, power module and control module, which requires waterproof and insulation. It can be broadly used for LED screen, Wind Power Generator, PCB substrate, etc.
Technical Parameters Silicone sealant adhesive for LED
Features | Part A | Part B | |
Before Curing | Appearence | Transparent Fluid | transparent Fluid |
Viscosisty(25°Ccps) | 600±200 | 800±200 | |
Operation features | Mixing Ratio | 1to1 | |
Viscosisty(after mixing) (cps) | 600~1000 | ||
Operating Time(25°C hr) | 3 | ||
Curing time (min,25°C) | 8 | ||
Curing time(80°C hr) | 20 | ||
After Curing | Hardness(Shore A) | 0 | |
Thermal conductivity [W(m·K)] | ≥0.2 | ||
Dielectric Strength(KV/mm) | ≥25 | ||
Permittivity(1.2MHz) | 3.0~3.3 | ||
Volume Resisivity(Ω·cm) | ≥1.0×1016 | ||
linear expansibility [m/(m·K)] | ≤2.2×10-4 | ||
Fire Resistance | 94-V1 |
(Pls notethe above data for this product in 25 °C temperature, 55 percent humidity conditions, for reference. The accurate data is measured by customers to when using.)
9301 Silicone Sealant with high quality
TECHNICAL GUIDELINES Silicone sealant adhesive for LED
1, Pls put part A and part B in separate container and stir evenly before mixing the two part together.
2, Weight Ratio part A to part B = 1 to 1
3, Deaeration the mixture under 0.08 MPa for 3 minutes.
4, The temperature influences the curing time of 9301. When in too low temperature, we suggest customers appropriately heat the mixture to accelerate vulcanization.
SHELF LIFE AND TRANSPORTATION Silicone sealant adhesive for LED
1. Twelve(12) months from date of shipment when stored at 24C in original unopened packages.
2. This kind of product is non-dangerous product, it can be transported as general chemicals.
Any more information , please fell free to contact with Miss sara
Tel: 0086-755-85224692
Fax: 0086-755-89948030
Mobile:0086-13823674309
9301 Silicone Sealant with high quality
Silicone sealant adhesive for LED
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.