electronic components potting silicone coating PCB

  electronic components potting silicone  coating PCB

 Features & Applications

1. it is in two parts with low viscosity.
2. it can be cured completely at room temprature.
3. it works on the surface of material as PC(Poly-carbonate), PP, ABS, PVC as to its superior bonding feature.
4. it is also applicable for insulation, waterproof and bonding of electronics parts.
5. it meets the requirements of European RoHs.

Typical Application
-Potting for Protection of general electronic module.
-Outdoor protection for LED screen.

Warm Tips
 1. Sealing pakage for storage. The mixture should be used up at once to avoid wasting.
 2. Silicone belongs to non-dangerous goods, but keep away form mouth and eyes.
 3. When it gets stratified after a period of storage, Please mix HY-210# evenly before using,
      it does not affect the performance.
 

Package
5.5kg/set (Part A 5kg + Part B 0.5kg)

30kg/set  (Part A 25kg + Part B 2.5kg)

220kg/set (Part A 200kg + Part B 20kg)

Shelf Life and Transportation
1. Twelve(12) months when stored at 25C in original unopened packages.
2. This is a non-dangerous product, it can be transported as general chemicals.
3. Products exceed the storage life should be confirmed normal before using.

Technical Guidelines
1. Pls put part A and B in separate container and stir evenly before mixing the two
   parts together.
2. Mixing Ratio part A:part B is 10:1
3. Bubble release if necessary, deaeration the mixture under 0.08 MPa for 3 minutes.
4. HY-215# is cured at roon temperature, so pls put it under room temperature after
   pouring. It comes to next process when basically cured, and it takes about 24 hours
   for completely cured.

Further information, please feel free to contact Firleanna:

SKYPE:HY-Firleanna

T: 86-755-89212365

M:86-18938867520

F: 86-755-89948030

3w(dot)szrl(dot)net

3w(dot)sellsilicon(dot)com