Injection Molding Silicone Rubber for Resin Jewelry Supplier

Injection Molding Silicone Rubber for Resin Jewelry Description:

Injection Liquid Silicone Molding for Resin Jewelry production is a two-component liquid silicone rubber for injection molding processes. HY-2130 shows a higher productivity, less yellowing and low volatile contents. HY-2130 would be possible to increase productivity by reduce injection time and total cycle time. Also, it is easier to inject into the cavity of the mold which is more complicated designed. In addition, higher transparency and less volatile content make it most suitable for consumer products.

Injection Molding Silicone Rubber for Resin Jewelry Application:

Because of the outstanding properties,HY-2130 is particularly suitable for the following elastomeric articles: resin beads, pendants, candy crystal, ice resin, jewelry, resin bangle bracelet, rock candy,. etc.

Injection Molding Silicone Rubber for Resin Jewelry  Specification:

Vulcanisates consisting of  HY-2130 are distinguished by the following properties:

·High flowability, low viscosity and short injection time.

·Low volatiles content; Fast cure

·Excellent mold release, Excellent Thermal stability

·Excellent compression set; Excellent resilience

·High stability to ozone and ultraviolet light

·Outstanding resistance to ageing

·Not readily combustible, does not melt or drip

·Easy-pigmentable with LSR Colour Pastes fulfill the requirement of KTW

Injection Molding Silicone Rubber for Resin Jewelry Picture Show:

Injection Molding Silicone Rubber for Resin Jewelry Typical Physical Properties:

Injection Molding Silicone Rubber for Resin Jewelry Processing Recommendations:

Ready-to-use mixtures (of the components A and B) are fed directly to the injectionmoulding machine from the original containers by means of a metering and mixing unit. The mixture, consisting of the two components in the ratio 10:1, is injected into the heated mould. Because of low viscosity, the injection daospeed and injection pressure need to be carefully adjusted so that the injection time can be decreased. At mould temperatures of 170 - 230°C, the addition -crosslinking silicone rubber vulcanises free of dissociation products within a few seconds. Excellent flowability and easy demoulding permit fully automated production of large numbers of articles in shorter total cycle times.

Injection Molding Silicone Rubber for Resin Jewelry Shelf Life:

8-10 months when stored under 24°C in original unopened packages.

Injection Molding Silicone Rubber for Resin Jewelry Package:

Packed in 20kg/pail + 20kg/pail and 200kg/pail + 200kg/pail.

Injection Molding Silicone Rubber for Resin Jewelry Certification:

ISO9001: HK05/01358 

SGS:GZ0606100461/CHEM

RoHS:BTRS091718751

Patent:ZL200520001597.8

Need any help on silicone rubber, please feel free to contact Ms Kitty:

Tel:86-755-89948294

Mob:86-15989267535

E-mail: hysh(at)szrl(dot)net  

Skype:kity-467707861

You can also send me E-mail by scanning  2-Dimensional Bar Code below:

Our factory: