group nameH frame high speed precision press
Min Order1 set
brand nameXin Rui Feng
modelH45DBL
payment methodT/T
update timeMon, 09 Dec 2019 18:00:10 GMT
Press Capacity 45 Ton
Press Speed 200-1000mm
Stroke 20mm/25mm/30mm/40mm
Die Height 210-250mm
Bolster Area 800mm*550mm*110mm
Slide Area 750mm*380mm
Min Order1 set
Mircon brand 45Ton H Type High Speed Power Press( from Taiwan and 90% new)
Features:
H-type gantry high speed punch
a) two center guide pillars, four structural guide pillars, four slide guide pillars and two auxiliary guide pillars.
b) electric mold adjusting device: the gantry 35ton (included) or above is more upgraded than the C type, and the mold height can be adjusted easily by pressing the up and down buttons.
c) oil pressure mold locking switch: it is more convenient to change the mold
d) freezer: because the gantry is closed, the punch is easy to get hot when driving at a high speed of 700800, so it is not easy to get hot if the oil temperature can be reduced by adding the freezer.
e) dynamic balance system (linkage)
This press is generally used for high precision products such as SMT, computer, communication terminals, etc.
2.H Type High Speed Power Press General Parameters:
Model | H45DBL | |||
Capacity(ton) | 45 | |||
Stroke(mm) | 20 | 25 | 30 | 40 |
Stroke per minute(s.p.m.) | 200-1000 | 200-900 | 200-800 | 200-600 |
Closed die height(mm) | 210-250 | 208-248 | 205-245 | 200-240 |
Bolster area(mm3) | 800*550*110 | |||
Slide area(mm2) | 750*380 | |||
Slide adjustment(mm) | 40 | |||
Blanking hole(mm2) | 120*550 | |||
Motor power(HP) | 15 | |||
Gross weight(kg) | 8516 | |||
Loop system | Forceful automation | |||
Speed control system | Inverter | |||
Clutch & Brake | Air & Friction | |||
Fixed-position stop system | Standard | |||
Vibration system | Mounting or pneumatic mounting(Optional) |
3.Contact:
Email:allen..........com
Tel:+86 755 84829280
Fax:+86 755 28372363
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.