group namerubber flap check valve
Min Order1 piece
brand nameLIKE valve
modelH44X
payment methodT/T
update timeSat, 07 Jul 2018 16:51:51 GMT
Min Order1 piece
Specification
Rubber flap check valve is coated with rubber on its outer layer and the switching duration it can be up to 1 million times.This check valve adopts the total flow area of type design, with a small head loss, not easy accumulation chores, simple maintenance and so on characteristics.This valve is mainly suitable for water supply and drainage system, can be installed in the outlet, to prevent backflow and water hammer pump damage.The check valve can be installed in a reservoir in and out of the water pipe on the by-pass pipe, in order to prevent the water back into the water supply system.
Standard Features
Nominal pressure(MPa) | 1.0 | 1.6 | 2.5 |
Intensity pressure test(MPa) | 1.5 | 2.4 | 3.75 |
Seal pressure | 1.1 | 1.76 | 2.75 |
Working temperature | ≤80℃ | ||
Suitable medium | Clear water,sewage,sea water | ||
Slow shuts the time | ≤60s |
Material of main parts
Name | Material |
Body | Gray iron,ductile iron,Cast steel |
Valve petal | Rubber combination components |
Spring | Stainless steel |
Application
Rubber flap carbon steel flange end silicone check valve is used for throttling or shutting off the flow of corrosive or non corrosive gases, liquids and semiliquid. It can be installed in any selected position in pipelines in the industries of petroleum processing, chemicals, food, medicine, textile, ship building,ship repairing,paper making, hydroelectricity engineering, building, water supply and sewage, metallurgy, energy engineering as well as light industry.
Product photo
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.