IN-MN605 0 to 100kg Tension and Compression load cell for force measurement
group nameMini Load Cell
-
Min Order1 piece
brand nameInntronic
modelIN-MN605
payment methodL/C
-
update timeTue, 19 Dec 2017 21:07:08 GMT
Paramtents
Capacity 0～1,2,5,10,20,100kg
Material Stainless Steel
Rated Output 2.0±10%mV/V
Application Force Measurement
Creep (30min) 0.05% F.S.
Zero Balance ± 2 % F.S.
Non-linearity 0.05% F.S.
Hysteresis 0.05% F.S.
Repeatability 0.05% F.S.
Safe Load Limit 150%
Packging & Delivery
Weight1.00kg / piece
Min Order1 piece
Briefing
Stainless steel.
Detailed
IN-MN605 tension and compression load cell
Advantages:
High precision, high motion action, big capacity,small structure.
Stainless steel to get best waterproof
特点：
具有高精度、高动态响应、大量程、体积小等特点。不锈钢材料，小体积使得具有较小的偏心误差。
本产品可试用于各种拉压称重测力设备。
注意事项：
1.传感器为拉压两用模式
2.安装时请注意两端的同轴度小于0.05
3.压式使用时可以一端是硬连接，另一端受力
4.拉式使用最好是软连接
量程 | 0～1,2,5,10,20,100kg | 材质 | 不锈钢Stainless Steel |
Capacity | Material | ||
输出灵敏度 | 2.0±10%mV/V | 输出电阻 | 350± 3Ω |
Rated Output | Output Impedance | ||
零点输出 | ± 2 % F.S. | 绝缘电阻 | ≥5000MΩ/100VDC |
Zero Balance | Insulation | ||
非线性 | 0.05% F.S. | 使用电压 | 3-5V |
Non-linearity | Recommended Excitation | ||
滞后 | 0.05% F.S. | 最大使用电压 | 10V |
Hysteresis | Maximum Excitation | ||
重复性 | 0.05% F.S. | 温度补偿范围 | - 10 ~ 60 ℃ |
Repeatability | Compensated Temp Range | ||
蠕变 （30分钟） | 0.05% F.S. | 工作温度 范围 | - 20 ~ 80℃ |
Creep (30min) | Operating Temp Range | ||
温度灵敏度漂移Temp Effect on Output | 0.05% F.S. / 10℃ | 安全超载 | 150% |
Safe Load Limit | |||
零点温度漂移 | 0.05% F.S. / 10℃ | 极限超载 | 300% |
Temp Effect on Zero | Ultimate Load Limit | ||
输入电阻 | 350±5Ω | 电缆线尺寸 | φ 3 x 3m |
Input Impedance | Cable Size | ||
电缆线连接方式 | Ex + : 红 Red; Ex - : 黑 Black; Sig + : 绿 Green; Sig - : 白 White | ||
Wire Connection | |||
You need a product
You May Like
- Delivery clauses under the trade mode
- FOB, CFR, CIF, EXW, FCA, CPT, DDU, Express Delivery
- Acceptable payment methods
- T/T, L/C, PayPal, Westem Union