group namehigh flow filter cartridge
Min Order50 piece
brand nameKTMT
payment methodL/C, Western Union, T/T, Paypal
update timeTue, 19 Dec 2017 14:18:50 GMT
Filter Media PP Melt blown,Pleated glass fiber,Pleated depth PP
Length 20
Outside Diameter 6 inch (152 mm)
Filtration Rating 1μm,4.5μm,6μm,10μm,20μm,40μm,70μm,100μm
Support/Drainage Polypropylene (PP)
End Cap Material Glass fiber reinforced Polypropylene (PP)
Seal Material EPDM,NBR
Size104cm x 32cm x 32cm
Weight10.00kg / piece
Min Order50 piece
Description:
HF Series High Flow Pleated Cartridge Filters are a new products which developed by KTMT company, the outer diameter usually make 6 inch (152 mm), coreless and outside hard framework, single open end when the other end is sealed with O-ring end cap, liquid flow from inside to outside pattern. The large diameter design of high flow pleated cartridges enlarge big filtration area to save the quantities of filter cartridges, high flow rate when good filtration efficiency, wide of application and chemical compatibility, excellent filtration material for industrial fluid filtration system.
Specification:
Filter Media | PP Melt blown,Pleated glass fiber,Pleated depth PP |
Length | 20"(508 mm),40"(1016 mm),60"(1524 mm) |
Outside Diameter | 6 inch (152 mm) |
Filtration Rating | 1μm,4.5μm,6μm,10μm,20μm,40μm,70μm,100μm |
Support/Drainage | Polypropylene (PP) |
End Cap Material | Glass fiber reinforced Polypropylene (PP) |
Seal Material |
Features:
- The highest flow rate of pleated filter cartridges could get 110 M3/H
- Gradient pore structure of high flow pleated filters provide layered filter
function
- High flow pleated cartridge filters are well filtration efficiency and
reasonable cost
- The reduction of filtration system maximum 50% when use pleated
high flow filters
- Out-to-in filtration constriction of mass flow pleated cartridges ensure
holding all impurities stay inside the filter
- The Normal size of mass flow pleated filters have 20 inch, 40 inch and
60 inch, special specifications can be customized.
Operation Data:
Maximum Operating Temperature | PP Melt Blown: 65℃ |
Pleated depth PP: 82 ℃ | |
Pleated glass fiber: 121℃ | |
Maximum Differential Pressure | PP Melt Blown: 1.03 Bar at 65℃ |
Pleated depth PP: 3.4 Bar at 82 ℃ | |
Pleated glass fiber: 3.4 Bar at 121℃ | |
Suggested maximum flow of water | 20.69 inch length: 660 LPM |
40.69 inch length: 1,300 LPM | |
60.69 inch length: 1,900 LPM | |
Recommend Change out Differential Pressure | 2.4 Bar at 20 ℃ |
KTMT advantage
l Professional manufacturer
l Good service and fast delivery
l Quality control and high reputation
l Advanced technology
Application:
--Paints and coatings
--Solvents, API and water filtration in Bio field
--Microelectronic,film and resin
--Pre-filtration of RO and sea water desalination
--Water filtration in Power generation
--Bottled water,high fructose,edible oil,soft drink and milk
-- Pre-filtration of ultrapure water.
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.