82A 82B SWRH82A SWRH82B Cold Drawn High Carbon Spring Steel Wires

group nameHigh Carbon Steel Spring Wires
Min Order1 metric ton
brand namefushun
model82A 82B SWRH82A SWRH82B
payment methodL/C, D/A, D/P, T/T
update timeThu, 02 Apr 2020 09:16:35 GMT

contact supplier

Paramtents

Diameter 0.1-10mm
Delivery Condition Hard Drawn
Surface Condition Bright

Packging & Delivery

Min Order1 metric ton

Briefing

82A 82B SWRH82A SWRH82B Cold Drawn High Carbon Spring Steel Wires

Detailed

Products Details

High Carbon Steel Spring Wires have the characteristics of stable chemical composition, small deviation,uniform cleaning rod performance, high rate sorbitizing, good plasticity. High carbon steels are difficult to weld because they contain carbon in the range of 0.6 percent to 1.0 percent. High carbon steels are susceptible to heat, and it easily flame hardened which allows it to be worked into many different forms. High carbon steels have greater tensile strength and are used to create products where strength is required.

Chemical Composition(%)

Steel Grade	C	Si	Mn	P	S	Cr
42A/B	0.42--0.45	0.20-0.21	0.61	0.011	0.005	0.06
SAE1045	0.44--0.46	0.20--0.23	0.57--0.60	0.009	0.008	0.02--0.09
SAE1060	0.60-0.61	0.18--0.22	0.52--0.59	0.012	0.007	0.06--0.07
SAE1065	0.65	0.21	0.56	0.013	0.008	0.05
65Mn	0.65	0.23	0.95	0.012	0.007	0.02
SAE1070	0.69--0.71	0.19--0.21	0.53--0.58	0.010-0.012	0.003-0.006	0.01--0.05
72A/B	0.72	0.19	0.71	0.013	0.006	0.02
SAE1080	0.80-0.81	0.22-0.24	0.59-0.76	0.01	0.004	0.04
SAE1084	0.8~0.93	/	0.6~0.9	≤0.04	≤0.05	B0.0005~0.003
82B	0.82	0.24-0.25	0.76-0.77	0.011-0.014	0.004-0.007	0.14-0.17

Application: for general application spring and mechanical spring.
Beside to make the wire according to the standard, we also try to supply the wire according customer's
special requirement.

Technical specification:
(1)Standard: DIN17223-1-1984,EN10270-1,ASTM-A227,GB4357-89
(2)Size: 0.20mm-14.0mm

1. General introduction:
Raw material is rigorously selected and approved before put into processing For serving spring and wire form industry, high tensile strength is not the ultimate goal to pursue, but the balance of flexibility and tensile strength to prevent our wire from deformed or broken up during winding in spring machine. In addition, for other usage, our products also have gained a sound reputation from the appliance as controlling cable or connecting wire for automobile industry and hard needle. Hot-dipped and electro-galvanized spring wire available.

2. Range of application:
(1) mattress spring
(2) compression spring
(3) extension spring
(4) torsion spring
(5) mechanical spring
(6) wire forms
(7) core of controlling cable
(8) connecting wire
(9) hard needle

3. Specifications:
(1) 0.30mm-13.00mm to comply with DIN17223-1-1984 Class B
(2) 0.30mm-3.50mm to comply with DIN1723-1-1984, Class C, EN10270-SH
(3) 0.30mm-2.00mm to comply with DIN1723-1-1984 Class D
(4) 0.30mm-13.00mm to comply with ASTM-A227 grade I and II
(5) lightly-oiled or heavily-oiled subject to requirement.
(6) Other standards are subject to requirements, such JIS, AS or GB

Mechanical Properties

No.	DIAMETER (MM)	TENSILE STRENGTH MPA	TORSIONS Min./360°
1	0.30mm	2010-3000	20
2	0.45mm	2200-2600	20
3	0.50mm	2200-2600	20
4	0.55mm	2150-2550	20
5	0.60mm	2110-2500	20
6	0.70mm	2060-2450	20
7	0.80mm	2010-2400	20
8	0.90mm	2010-2350	20
9	1.00mm	1960-2300	20
10	1.20mm	1910-2250	20
11	1.40mm	1860-2210	20
12	1.60mm	1810-2160	20
13	1.80mm	1760-2110	15
14	2.00mm	1710-2010	15
15	2.30mm	1660-1960	15
16	2.60mm	1660-1960	15
17	2.90mm	1620-1910	12
18	3.20mm	1570-1860	12
19	3.60mm	1570-1810	12
20	4.00mm	1570-1810
21	4.50mm	1520-1710
22	5.00mm	1470-1710
23	5.50mm	1470-1710
24	6.0mm-8.0mm	1370-1660
25	9.0mm-14.0mm	1130-1420

82A 82B SWRH82A SWRH82B Cold Drawn High Carbon Spring Steel Wires

Paramtents

Packging & Delivery

Briefing

Detailed

You need a product

Related Searches

You May Like