Oil Country Lathe CNC Pipe Threading Cutting Lathe Machine

1.CNC Pipe Threading Lathe machine tool QK1319 is high quality cnc machine tool, mainly used for processing inner and outer pipe thread (including metric thread and inch thread), and can also undertake various turning works such as turning inner and outer cylindrical surface, conical surface and other revolution and end surface as general CNC lathes

2.  Feature

.We set up TRB (tapered rolling bearings) on this lathe to increase the rigidity of the spindle. 

.Big spindle bore and double chuck allows clamp and process big diameter pipes;The spindle bore is very large and set up double chucks both front and back and you can choose electric chucks as you like.

.Ultrasonic frequency quenched guide-ways are hard enough for good wear-resistance;Carriage and guide way contact surface pasted with Turcite B to maintain long-term accuracy,The slide rail f saddle is treated by wear-resisting layer coated, to avoid the crawling.

.The slide rail f saddle is treated by wear-resisting layer coated, to avoid the crawling.

. There are two types of speed change: Manual and step less.

. Set up self lubrication system, and easy to maintain.

.Integral machine bed adopts high strength iron to relize high rigidity and precision;

3.Main Characters:

Hollow spindle bore design allows processing extra-long work-piece

Double chuck equipment realizing better clamping of work-piece

Taper guide bar installed ensures taper thread processing ability

1.  Compared with other factories, casting material which produced by our company independently is really better than the others. The product adopts the advanced electric furnace melting resin sand molding casting technology, sothe gas permeability is superiorand it can effectively avoid the casting internal voids, porosity.We can absolutely ensure the casting qualityafter the analysis of United States imported equipment precision spectrometer.

2.  With the super audio quenching treatment, the hardness ofBody guide rail can reach HRC55 degrees and above. Itcan keep the hardnesshigh accurate, and prolong the wear resistance and service life. The lathe beds of Other manufacturers are all adopted abutting joint because of  cupola restrictions (1 tons of cupola a pack of hot metal) , butour six electric furnace are 3 tons, So our one to twelve meters lathe bed and guide screw are allfor onewith the betterStiffness and toughness.

3.  The lathe bed we produced is all researched and developed by our own engineers. It adopts special structure ,andthe natural aging treatment, these all can greatly increased the rigidity and are helpful to widen and thicken thedragging plate, therefore the machine will be more stable and have the stronger cutting ability.

4.  The large plate guide rail (X rail) is also adopt the super audio quenching treatment, so it increased hardness and then could guarantee the service life of equipment more efficiently. This is our particular advantage.

5.  The reason why using the original mechanical transmission is to make sure that the main motor can also play on the maximum torque when the equipment runs at a low speed . If we just do the frequency conversion, it will get the lathestuck and damage the work piece.

6.  In order to make sure the accuracy, the equipment will firstly tested by the laser interferometerimported from Britain to testrepeated positioning accuracy of X, Z direction. Then the whole machine will be tested according to the National standard. As long as it passed all the tests, the equipment can be accessed to the market

Our enterprise has got the ISO9001-2008 quality system certification and the European Union CE certification. We have established the complete customer-oriented management system which can guarantee the quality of the service and products. With the hard work of many years, our enterprise has been named “the most trust-worthy enterprise of Shandong”.

Our enterprise has got the recognition of the high-quality product and a considerable market share in both domestic and abroad.