group nameBi-fold Barn Door Hardware
Min Order50 piece
brand nameWEKIS Furniture&Sliding Door Hardware Manufacturer
modelAA200193
payment methodT/T, PayPal, Cash
update timeSat, 18 Jul 2026 19:22:16 GMT
Material Steel
Finishing Satin Black
Qty/ctn 1 set
Carton size L: 204 W: 22 H: 8.5
Remark Remark
CBM/ctn 0.038
Min Order50 piece
|
Item no
|
AA200193
|
|
Finishing
|
Satin Black
|
Remark | one-piece rail packed |
Material | Steel |
Description | Aluminum sliding track bars (long silver tracks) – 8 pcs Dustproof brush sealing strips (black brush strips) – 8 pcs Green wheel sliding rollers (front door trolleys) – 2 sets (4 rollers total) Upper hanging roller brackets (top cabinet hangers) – 4 pcs Black square bottom limit blocks – 2 pcs Small round bottom stoppers – 3 pcs Middle connecting hinge brackets – 1 pc Side hinge mounting brackets – 4 pcs Soft close buffer damper – 1 pc Screw & fixing accessory bag (screws, washers, connectors) – 1 pack |
MOQ(pcs) | Negotiable |
This WEKIS hidden folding cabinet door hardware kit is a complete all-in-one sliding track system specially customized for tall kitchen appliance cabinets, pantry cabinets and built-in oven storage cabinets. It enables cabinet doors to fully fold and hide inside the cabinet body without occupying extra external space, presenting a seamless minimalist kitchen visual effect. Every matching accessory is included in the package, supporting direct DIY installation without purchasing extra fittings separately.



Step 4
Installing the bottom pivot plate
The location of this bottom pivot plate is critical for proper function of the bifold barn door.
1. Pull out the bottom of the door slightly and insert the bottom pivot plate into the brass sleeve located in the bottom of the fixed position door,reposition the door.
2. Using a level,plumb the door and mark the position of the bottom pivot plate on the floor(from edge and outside edge).
3. Put the bottom pivot plate on the marks and drill holes,secure the floor using the supplied screws.
4. Take the doors off the rail by removing the set screw on the fixed roller,insert the bottom pivot plate into the brass Sleeve,then re-hang the doors on the rail.
Step 5: Installing strip seal
网络文化经营许可证:浙ICP备14006100号-11 2007-2026 Tradevv.com. All rights reserved.