Laser displacement|COMS Laser Sensor|DADISICK

  • group nameLaser Displacement Sensor

  • Min Order1 piece

  • brand nameDADISICK

  • modelGFL-Z series

  • update timeTue, 07 May 2024 04:59:37 GMT

Paramtents

  • Response time: Up to 1.5ms

  • Repetitive accuracy: Up to 10µm

Packging & Delivery

  • Min Order1 piece

Briefing

By converting from the laser into electrical signals. determine various characteristics,distance, displacement, or position.

Detailed

Measuring range specification
Species
Measuring 
center 30mm
Measuring 
center 50mm
Measuring 
center 100mm
Measuring 
center 200mm
Measuring
center type 400mm
Model
NPN output

GFL-Z50N
GFL-Z100N
GFL-Z200N
GFL-Z400N
Analog quantity output
GFL-Z30NM
GFL-Z50NM
GFL-Z100NM
GFL-Z200NM
GFL-Z400NM
RS485 communication
GFL-Z30N-RS485
GFL-Z50N-RS485
GFL-Z100N-RS485
GFL-Z200N-RS485
GFL-Z400N-RS485
Measuring center distance
30mm
50mm
100mm
200mm
400mm
Measuring range
±5mm
±15mm
±35mm
±80mm
±200mm
Repeatability
10μm
30μm
70μm
200μm
400μm(Measuring distance200~400mm)
800μm(Measuring distance400~600mm)
Straightness
±0.1%F.S.
±0.2%F.S.
±0.2%F.S.(Measuring distance200~400mm)
±0.2%F.S.(Measuring distance400~600mm)
Temperature characteristic
0.03%F.S./℃
illuminant
Red semiconductor laser Class 2
Maximum output :1mW, light beam 
wavelength :655nm
Beam diameter
About φ50μm
About φ70μm
Aboutφ120μm 
About φ300μm
About φ500μm
Supply voltage
12~24V DC±10%, pulsation P-P10%
Current consumption
Below 40mA (24V DC supply voltage), below 60mA (12VDC supply voltage)
Control output
<NPN output type >
NPN open collector transistor
●Maximum in￾ow current :50mA
●Applied voltage :30V DC below (control output -0∨)
●Residual voltage: less than 1.5V (in￾ow current 50mA)
●Leakage current: below 0.1mA
Output action
ON in light/ON in non-light can be switched
Short circuit protection
Equipped (automatic recove￾ type)
Analogoutput
Voltage analog output
(When alert :+5.2V)
Output range :0 to 5V
Output impedance100Ω
-
Output range:0~5V
Output impedance:
100Ω
-
Output range:0~5V
Output impedance:
100Ω
Current analog output
(Ale￾ :0mA)
Output range :4 to 20mA
Load impedance :300Ω or less
-
Output range :4 to 20mA
Load impedance :300Ω or less
-
Output range :4 to 20mA
Load impedance :300Ω or less
Mechanical parameters
Reaction time
1.5ms/5ms/10ms can be switched
External input
NPN No contact input Valid :0V to +12V DC Input impedance: about 10 kΩ
Protective construction
IP60
Degree of fouling
2
Operating ambient temperature
-10℃~+40℃(pay attention to do not condensation, icing), storage :-20℃~+60°C
Ambient humidity
35%~85%RH, storage :35%~85%RH
Use ambient light
Incandescent lamp: the illumination degree of the illuminated su￾ace is less than 3000lx
Service level
Below 2000m
Cable
With 0.15mm 5-core composite cable 2m
Material
Body shell: aluminum casting front cover plate: propylene base
weight
Approx. 35g(without cable), Approx. 85g(with cable)
Applicable specification
Compliance with EMC directive
(Note): When the measurement conditions are not speci￾ed, the use conditions are as follows: power supply voltage :24V DC, 
ambient temperature :+20℃, reaction time :10ms, analog output value of the measurement center distance. Object Object: White paper.
DIMENSION                                                                                                                                                                                           
Accessory installation diagram                                                                                                                                                                  
WIRING DIAGRAM                                                                                                                                                                                    
Wiring diagram
DOCUMENTS & DOWNLOADS                                                                                                                                                                  
CATALOGUE

GFL-Z series laser displacement sensor
GFL-Z Series instructions
3D
GFL-Z series.3D-STP
Title
Sample Content
Title
Sample Content