PSENopt II Series 30 mm Resolution 18 m Sensing Distance 150 mm to 1350 mm Protective Height Basic Type 3 Light Curtain with Hand Protection Replacement

With the rapid development of industry, the operation and control technology of machines are becoming more advanced, and automated equipment has become an essential tool in modern factories. However, if safety precautions are not properly implemented, there could be potential safety hazards in hazardous work areas such as punching machines, hydraulic presses, oil presses, intelligent warehousing, and industrial robots. The application of infrared light grid sensors in the field of safety protection is known as safety light curtains/safety light screens/optical protective devices, etc.

As the precision requirements for workpieces increase and labor costs become more expensive, along with the widespread use of automated equipment, many industries choose to use automated or semi-automated solutions to overcome tedious and repetitive manual measurements. These solutions are commonly used for measuring the shape, size, volume contour of objects, hole detection, classification detection, positioning detection, edge detection, height limitation detection, vehicle separation, and other aspects.

DADISICK's measurement light curtains are derived from safety light curtains and have higher accuracy and technical requirements. Their principle is based on detecting changes in the shape of objects passing through the infrared light curtain by sensing whether the infrared light is obstructed and the number of obstructing blocks.

Safety light curtains are commonly used for safety protection and detection positioning. Typically, safety light curtains are used as switch signals, with normally closed mode used for personal safety protection and normally open mode used for detecting the position of workpiece products

DADISICK's QL measurement light curtains usually communicate with safety light curtains using RS485/RS232/analog current/analog voltage. Of course, we also support network port output. The purpose is to transmit the signals detected by the measurement light curtains through communication to the PLC or controller to obtain the required data.