For Wenglor Laser Distance Sensor Time of Flight Replacement | 100 Measuring Range
group nameWenglor Laser Distance Sensors Replacement
-
Min Order1 piece
brand nameDADISICK
modelWenglor | X1TA101MHT88, X1TA101MHV80
payment methodT/T
-
update timeSat, 06 Dec 2025 04:32:38 GMT
Paramtents
Series: LT7 Series
Measuring range: 0.5 m to 250 m
Light spot size: Ø 500 mm
Measurement accuracy: —
Resolution: ± 2 mm
Packging & Delivery
Min Order1 piece
Briefing
DADISICK's DS Series Long-Distance Laser Rangefinder can serve as a replacement for wenglor laser distance sensor time of flight.
Detailed
For Wenglor Laser Distance Sensor Time of Flight Replacement | 100 Measuring Range
| Brand | From network | DADISICK | ||
| Models | X1TA101MHT88 | DS-120 | ||
X1TA101MHV80 | ||||
Measuring range | 100 m | MAX. 120 m | ||
Light spot size | ＜ 200 mm | 150 mm (@120 m) | ||
Measurement accuracy | — | ±2 mm | ||
Repeatability | — | 1 mm | ||
Measurement frequency | — | 1000 Hz | ||
Resolution | 4...20 mm | 0.1 mm | ||
Max. movement speed | — | 15 m/s | ||
Supply voltage | 18 ... 30 V DC | DC 9 V ... 30 V | ||
Current consumption | < 100 mA | 0.2 A at 12 V DC | ||
Laser class | Class 1 (EN 60825-1) | Class 2 | ||
Light source | 660 nm, Laser (red) | Red laser (visible light) | ||
Interface | — | SSI, Ethernet 100BASE-TX (Data Transmission) | ||
Connection | Connector: 1 x M12; coding: A | M12/4-pin/D-coded female straight (For Network); M12/8-pin/A-coded male straight (For Power/SSI) | ||
Dimensions | 30 x 55 x 81 mm | 123 × 69.5 × 90 mm | ||
IP rating | IP68 | IP65 | ||
Operating temperature | -25 ... 60 °C | -10℃~+55℃ | ||
We are able to reproduce the specific connection configuration of each brand with high level of accuracy. | ||||
Product Model Display Instructions
The brands and specifications displayed on this page are for reference and product selection purposes only. The Laser distance sensors we provide are manufactured by DADISICK and are not official products of Wenglor or any other brand mentioned. DADISICK offers compatible alternatives to official brand products. We do not own the rights to these brands. For genuine Wenglor products, please contact the brand's authorized representative directly.
Product Recommendations
DS Series Long-Distance Laser Rangefinder
FAQ
1. What is the measurement range of the DS Series laser distance sensor?
The measurement range is 0.2 to 200 meters, though the exact range may vary depending on the
type of reflector and surface characteristics.
2. Does the DS Series support dynamic measurements?
Yes, the DS Series supports dynamic measurements, allowing real-time positioning of high-speed moving objects with a measurement frequency of up to 1000 Hz.
3. Does the product feature environmental compensation?
Yes, the DS Series is equipped with an environmental light interference compensation algorithm, ensuring high-accuracy measurements under complex lighting conditions.
4. What are the size and shape of the laser beam?
The beam starts as a small-diameter dot and gradually spreads over distance. The exact dimensions depend on the measurement range.
5. Does the DS Series support multi-target measurement?
No, this series is designed for single-point measurement. Multi-target measurement can be achieved by using multiple devices.
Disclaimers
The product model information provided on this website is sourced from public channels, aiming to provide users with reference for product comparison and selection. This website does not guarantee the accuracy, completeness, or reliability of information, nor does it constitute a recommendation or recognition of any brand or company. Users should verify and bear corresponding risks when using the information provided on this website. This website shall not be liable for any loss or damage caused by the use of information on this website.
