200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameRTV-2 silicone rubber for molds making
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelHY630 HY638 silicone rubber
payment methodT/T, L/C, Westem Union
update timeTue, 05 Nov 2013 12:50:41 GMT
Color White
silicone rubber:curing agent 3%-5%
Certification SGS,MSDS,RoHS
Material 100% silicone
Appearance Fluid
Appliacation molding silicone rubber
Min Order200 kilogram
Polyurethane Crafts Mold Making Rubber Silicone
-------RTV-2 room temperature addition cure (platinum cure) silicone rubber series
Application of Polyurethane Crafts Mold Making Rubber Silicone
Food grade silicone rubber mainly used for making precision molds, food grade molds(such as chocolate, cake moulds), fiberglass molding, shoes insoles, for life casting, fabric finishing, seal for electronic components and solar circuit board, trademark decoration, baby nipples, cable accessories, etc.
Datasheet of Polyurethane Crafts Mold Making Rubber Silicone--
Model | HY-E620 |
Appearance | translucent |
Mixing proportion of curing agent(%) | 1:1 |
Operating time ( mins ) (25- 30 °C) | 30±10 |
Curing time( hrs) | 4±1 |
Hardness (A°) | 20±2 |
Density ( g/cm 3 ) | 1.08 |
Viscosity (CS) | 7000±2000 |
Tensile-strength ( kgf /cm2 ) | ≥40 |
Tear-strength (kgf /cm2 ) | ≥15 |
Elongation-break(%) | ≥300 |
Retractility(%) | ≤0.1 |
Model | HY-E625 |
Appearance | translucent |
Mixing proportion of curing agent(%) | 1:1 |
Operating time ( mins ) (25- 30 °C) | 30±10 |
Curing time( hrs) | 4±1 |
Hardness (A°) | 25±2 |
Density ( g/cm 3 ) | 1.08 |
Viscosity (CS) | 8000±2000 |
Tensile-strength ( kgf /cm2 ) | ≥55 |
Tear-strength (kgf /cm2 ) | ≥10 |
Elongation-break(%) | ≥300 |
Retractility(%) | ≤0.1 |
Model | HY-E642 |
Appearance | translucent |
Mixing proportion of curing agent(%) | 1:1 |
Operating time ( mins ) (25- 30 °C) | 30±10 |
Curing time( hrs) | 4±1 |
Hardness (A°) | 40±2 |
Density ( g/cm 3 ) | 1.08 |
Viscosity (CS) | 7600(17000,3700) |
Tensile-strength ( kgf /cm2 ) | ≥68 |
Tear-strength (kgf /cm2 ) | ≥14.5 |
Elongation-break(%) | ≥318 |
Retractility(%) | ≤0.1 |
Features of Polyurethane Crafts Mold Making Rubber Silicone
· Two-part silicone rubber:flowable liquid silicone and curing agent.
· Cured at room temperature within 3-6 hours.
· An exceptional fluidity and good operability.
· High duplicate times.
Description of Polyurethane Crafts Mold Making Rubber Silicone
RTV-2 addition molding silicone rubber is generally named two-components silicone rubber, Part A is a flowable liquid, part B is the curing agent. It features an exceptional fluidity and good operability. The mixing ratio can be 100:10 or 1:1,mainly be suitable for making FDA molds application.
Operating instruction of Polyurethane Crafts Mold Making Rubber Silicone
1.Stir part A and part B with right mixing ratio evenly. (HY-E620 is 1:1) and get the mixture for vacuum-pumping.(If there is no vacuumizer,you can just pour the mixture slowly from the corner so that less bubbles caused).
2.Enclose the product (the original model) with four plastic plates or wooden plates.
3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.
4.Pour the mixture with correct mixing ratio into the model frame.
After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .
Shelf life of Polyurethane Crafts Mold Making Rubber Silicone Twelve (12) months from date of shipment when stored at 24°C in original unopened packages.
Any questions, please feel free to contact Aaron:
TEL: 086-755-89948006
FAX: 086-755-89948030
MOBILE:086-13622300503
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.