LED lights potting silicone

FOB Price

US $15.28
100 - 40,000 kilogram
US $12.59
40,001 - 999,999 kilogram

group nameelectronic potting silicone rubber
Min Order100 kilogram
brand nameHong Ye silicone rubber
modelHY210#,215# silicone rubber
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 19:19:14 GMT

contact supplier

Paramtents

color White, Transparen,Black,Gray
Mixing ratio 10:1
MOQ 200KG
Sample Available
Payment T/T L/C Western union
Package 25kg/drum 200kg/drum
Features Liquid
Port shenzhen
HS Code 39100000
Certifications RoHS, MSDS, SGS, ISO9001:2000

Packging & Delivery

Min Order100 kilogram

Briefing

LED lights potting silicone
for Led light bonded seal
electronic components
power module
electronic potting

Detailed

Condensation Potting Compound HY 210

Features & Applications of product

HY 210 is condensation silicone potting compound in two parts with low viscosity.

It can be cured completely at room temperature. HY 210 works on the surface of material as PC(Poly-carbonate),PP,ABS,PVC as to its superior bonding feature. It is also applicable for insulation, waterproof and bonding of electronics parts. It meets the requirements of European RoHS.

Typical Application
- Potting for Protetion of general electronic Module.

- Outdoor protection for LED screen.

Technical Parameters

Properties index		Part A	Part B
Before Curing	Appearence	Black fluid	Colorless/ yellowish fluid
	Viscosisty(cps)	2500±500	-
Features when operation	Mixing Ratio(By weight)	10:1
	Operating Time(25°C /min)	20~30
	Curing time (hr,basically cured)	3
	Curing time (hr,perfectly cured)	24
	Hardness (shore A)	15±3
After Curing	Thermal Conductivity [W(m·K)]	≥0.2
	Dielectric Strength(kV/mm)	≥25
	dielectric permittivity(1.2MHz)	3.0~3.3
	Volume resistivity(Ω·cm)	≥1.0×1016
	Fire Resistance	94-V1

Customers are advised to carry out their own tests on clean, degreased substrates to ensure satisfactory adhesion is achieved. All values are typical and should not be accepted as a specification.

(Pls note: all data of this product above tested in 25 °C with 55% humidity conditions. It just for reference and we have no liability of it when testing under different conditions, or data was regenerated)

LED lights potting silicone

TECHNICAL GUIDELINES

1, Pls put part A and part B in separate container and stir evenly before mixing the two parts together.

2, Weight Ratio: part A: part B = 10:1

3, Bubble release if necessary. Deaeration the mixture under 0.08 MPa for 3 minutes.

4,HY 210 is cured at room temperature, so pls put it under room temperature after pouring.It comes to next process when basically cured, and it takes about 24 hours for completely cured.

Kindly note: Temperature and Humidity with a tremendous influences for curing of HY 210.

l Warm Tips:

1. Sealing pakage for storage.The mixture should be used up at once to avoid wasting.

2. Silicone belongs to non-dangerous goods, but keep away from mouth and eyes.

3. When it gets stratified after a period of storage,

Please mix HY 210 evenly before using, it does

not affect the performance.

PACKAGE
HY 210: 22Kg/set (Part A 20Kg + Part B 2Kg)

SHELF LIFE AND TRANSPORTATION

1. All packages of HY210 and curing agent should be stored in a clean, dry area in original sealed containers.

Under these conditions, it has a shelf-life is of about Twelve(12) months.

2. This product is non-dangerous, it can be transported as general chemicals.