Ceramics inserts CNGA
group nameCeramics inserts
-
Min Order1 piece
modelCNGA
payment method
-
update timeSat, 10 Mar 2018 15:23:10 GMT
Paramtents
Description Ceramics inserts CNGA
Material Ceramics
Grade AN5
Packing 10 pieces per plastic box
Packging & Delivery
Min Order1 piece
Briefing
Ceramics inserts CNGA
Detailed
What are ceramic inserts used for?
Ceramic Cutting Tool is an inorganic materials, die-pressed and sintered using very fine and pure raw materials. These are oxide, carbide and nitride with high purity and fine microstructure.Since the Ssangyong ceramics is prepared byHIP process to condense completely, it is highly wear resistant and very strong against the fracture.
Ceramics inserts CNGA
| Grade Information | ||||||
| Ceramics Composite System | Grade | Density g/cm3 | Hardness CPa | Fracture toughness MPa. | Wear coefficient | Recommand Application |
| Al2O3+TiCN | AN5 | 4.4 | 20 | ≥5.5 | ≥16 | Best suitable for different kinds of steel, iron (include high strong steel and -Manganese stee),also suitable for cutting different hardness steel, iron material. it is for finishing, roughing and general intermittent cutting.(milling) |
| Al2O3+(W,Ti)C | AC4 | 6.2 | 20.5 | ≥5.6 | ≥16 | Best suitable for different kinds of steel, iron (include high strong steel and -Manganese stee),especially for haradness HRC55 TO 68 of various kinds of hardened steel and wear resistant cast iron. it is for finishing, roughing and general intermittent cutting.(milling). Best Suitable for high speed cutting of different steel ,iron, especially for high hardness , iron roughing, and intermittent cutitng, it is for turning use. also could be for milling. |
| Al2O3+(TiC+金属） | AT53 | 4.8 | 19 | ≥6 | ≥16 | Best suitable for cutting of different high hardness alloy steel and alloy cast iron, especially for cutting ductile iron and boron cast iron. it is for finishing, roughing and general intermittent cutting. |
| Si3N4+TiCN | SN2 | 3.4 | 17 | ≥6.5 | ≥16 | Best suitable for cutting of different general cast iron, especially of processing nickel based heat resisting steels, it is forfinishing, roughing and general intermittent cutting. |
May & Xiang could offer full range of ceramics inserts, please contact with us if you cannot find the type you are looking for, we will send it to you by email.
You need a product
You May Like
- Nearest port for product export
- SHENZHEN, CHANGSHA
- Delivery clauses under the trade mode
- FOB, CIF, EXW, Express Delivery
- Acceptable payment methods
- T/T, PayPal, Westem Union, Cash
- Export mode
- Export through agents & Have the independent export and import right