group nameCeramics inserts
Min Order1 piece
modelTNGA16/22
payment method
update timeSat, 10 Mar 2018 15:23:45 GMT
Description Ceramics inserts TNGA16/22
Material Ceramics
Grade AN5
Packing 10 pieces per plastic box
Min Order1 piece
Grade Information | ||||||
Ceramics Composite System | Grade | Density g/cm3 | Hardness CPa | Fracture toughness MPa. | Wear coefficient | Recommand Application |
Al2O3+TiCN | AN5 | 4.4 | 20 | ≥5.5 | ≥16 | Best suitable for different kinds of steel, iron (include high strong steel and -Manganese stee),also suitable for cutting different hardness steel, iron material. it is for finishing, roughing and general intermittent cutting.(milling) |
Al2O3+(W,Ti)C | AC4 | 6.2 | 20.5 | ≥5.6 | ≥16 | Best suitable for different kinds of steel, iron (include high strong steel and -Manganese stee),especially for haradness HRC55 TO 68 of various kinds of hardened steel and wear resistant cast iron. it is for finishing, roughing and general intermittent cutting.(milling). Best Suitable for high speed cutting of different steel ,iron, especially for high hardness , iron roughing, and intermittent cutitng, it is for turning use. also could be for milling. |
Al2O3+(TiC+金属) | AT53 | 4.8 | 19 | ≥6 | ≥16 | Best suitable for cutting of different high hardness alloy steel and alloy cast iron, especially for cutting ductile iron and boron cast iron. it is for finishing, roughing and general intermittent cutting. |
Si3N4+TiCN | SN2 | 3.4 | 17 | ≥6.5 | ≥16 | Best suitable for cutting of different general cast iron, especially of processing nickel based heat resisting steels, it is forfinishing, roughing and general intermittent cutting. |
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.